|
Bbc parts
Removed last weekend from my motor
I have a set of 781 large oval port heads. Rebuilt about 25 hrs ago. 2.20 Fierra series 6000 intake valves and Fierra Super Alloy 1.89 exhaust valves. New springs and heads milled for 118 cc. Also comes with Hardin air gap polished dual plane intake (milled to match heads). Lots of top quality porting and bowl reshaping by top shop in Houston. Also have new (about 1 hr total use) comp extreme rockers and hydraulic roller lifters and push rods. Custom ground cam (Cam Motion), very close to crane 168731 25 hrs. Also have un-molested Mark 4 - 4 bolt block/main caps, stock bore ready for rotating assembly again 25 hrs since magna fluxed tanked -line bored fresh water only. This was a torque monster combo. I bought a 502 hp so not going to rebuild my 454. If anybody is interested PM me for info. |
Steve, Text Message sent
|
These items still for sale.
1) New (less than 1 hr total use) comp extreme rockers 1620-16. 2) Custom ground cam w/button (Cam Motion), very close to crane 168731 25 hrs. 3) Un-molested Mark 4 - 4 bolt block/main caps, stock bore ready for rotating assembly again 25 hrs since magna fluxed tanked -line bored fresh water only. 4) Very clean oil pan Mercruiser 8 qt. stock w/dipstick. 5) Melling oil pump w/ pickup 25 hours. 6) Timing gear and double roller chain, 25 hrs. No slack. |
These items still for sale. 2) Custom ground roller cam w/button-Mark 4 (Cam Motion), very close to crane 168731 25 hrs. $ 250 3) Un-molested Mark 4 - 4 bolt block/main caps, stock bore ready for rotating assembly again 25 hrs since magna fluxed tanked -line bored fresh water only. $ 650 4) Very clean oil pan Mercruiser 8 qt. stock w/dipstick. $150 5) Melling oil pump w/ pickup 25 hours. $50 6) Timing gear and double roller chain, 25 hrs. No slack. $ 50 |
PICS of block and pan. Oil Pan is rust free inside and out, no dents comes with dipstick and tube.
I had just oiled the cylinders so they look a little lumpy.https://cimg1.ibsrv.net/gimg/www.off...aa45b9555.jpeg https://cimg3.ibsrv.net/gimg/www.off...34458c6d5.jpeg https://cimg7.ibsrv.net/gimg/www.off...c8afab8f5.jpeg https://cimg3.ibsrv.net/gimg/www.off...5cec3491a.jpeg https://cimg3.ibsrv.net/gimg/www.off...93d49c0d5.jpeg https://cimg5.ibsrv.net/gimg/www.off...1370c0f84.jpeg https://cimg8.ibsrv.net/gimg/www.off...ab538aa07.jpeg |
offers?
|
where are you located?
|
Kentucky Lake/Dam area, close to Paducah 42029
I have a guy with great rates, I just sent 400# pallet to Cape Code area $ 150. What are you interested in? |
Price reduced.
Block $550 Pan $100 Cam $150 - $175 with timing gear/chain set. All plus shipping. |
offers?
|
| All times are GMT -5. The time now is 01:08 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.