Like Tree0Likes

Bbc parts

Reply

Old 11-08-2019, 04:56 PM
  #1
Registered
Thread Starter
 
Join Date: Apr 2014
Posts: 1,731
Default Bbc parts

Removed last weekend from my motor
I have a set of 781 large oval port heads. Rebuilt about 25 hrs ago. 2.20 Fierra series 6000 intake valves and Fierra Super Alloy 1.89 exhaust valves. New springs and heads milled for 118 cc. Also comes with Hardin air gap polished dual plane intake (milled to match heads). Lots of top quality porting and bowl reshaping by top shop in Houston.

Also have new (about 1 hr total use) comp extreme rockers and hydraulic roller lifters and push rods.
Custom ground cam (Cam Motion), very close to crane 168731 25 hrs.
Also have un-molested Mark 4 - 4 bolt block/main caps, stock bore ready for rotating assembly again 25 hrs since magna fluxed tanked -line bored fresh water only. This was a torque monster combo.
I bought a 502 hp so not going to rebuild my 454.
If anybody is interested PM me for info.

Last edited by GLENAMY 242SS; 11-08-2019 at 07:53 PM.
GLENAMY 242SS is offline  
Reply With Quote
Old 11-10-2019, 08:07 AM
  #2
Registered
Thread Starter
 
Join Date: Apr 2014
Posts: 1,731
Default

Steve, Text Message sent
GLENAMY 242SS is offline  
Reply With Quote
Old 11-11-2019, 04:46 PM
  #3
Registered
Thread Starter
 
Join Date: Apr 2014
Posts: 1,731
Default

These items still for sale.
1) New (less than 1 hr total use) comp extreme rockers 1620-16.

2) Custom ground cam w/button (Cam Motion), very close to crane 168731 25 hrs.
3) Un-molested Mark 4 - 4 bolt block/main caps, stock bore ready for rotating assembly again 25 hrs since magna fluxed tanked -line bored fresh water only.
4) Very clean oil pan Mercruiser 8 qt. stock w/dipstick.
5) Melling oil pump w/ pickup 25 hours.
6) Timing gear and double roller chain, 25 hrs. No slack.
GLENAMY 242SS is offline  
Reply With Quote
Old 11-14-2019, 02:43 PM
  #4
Registered
Thread Starter
 
Join Date: Apr 2014
Posts: 1,731
Default

These items still for sale.
1) New (less than 1 hr total use) comp extreme rockers 1620-16.

2) Custom ground roller cam w/button-Mark 4 (Cam Motion), very close to crane 168731 25 hrs. $ 250
3) Un-molested Mark 4 - 4 bolt block/main caps, stock bore ready for rotating assembly again 25 hrs since magna fluxed tanked -line bored fresh water only. $ 650
4) Very clean oil pan Mercruiser 8 qt. stock w/dipstick. $150
5) Melling oil pump w/ pickup 25 hours. $50
6) Timing gear and double roller chain, 25 hrs. No slack. $ 50
GLENAMY 242SS is offline  
Reply With Quote
Old 11-18-2019, 03:44 PM
  #5
Registered
Thread Starter
 
Join Date: Apr 2014
Posts: 1,731
Default

PICS of block and pan. Oil Pan is rust free inside and out, no dents comes with dipstick and tube.
I had just oiled the cylinders so they look a little lumpy.





GLENAMY 242SS is offline  
Reply With Quote

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


OSO Sponsor
OSO Advertiser
OSO Advertiser
OSO Advertiser