Upper plenum and the intake manifold what price total shipped to TX

THANKS I am not using them period for any engine. Thanks

Also would you mind if I made some comments about those injectors ? If not that s fine as well and I understand. Possible and hopefully Dannydean would beny from it.

Let's hear it. Is there something wro g with them bup. That I should be worried about.

Your inbox is for - so here is what I came up with:
​​​​​​Checked on shipping:

Total weight is about 58 lbs - shipping to 76101 is about $45 (need your address if business or residential)
Will sell the upper and lower for $130

Total is around $175 thru Paypal.

PM me your info if you're interested.

Thx

Danny, if you have an aluminum intake and Rectangula port head - make sure the gasket is covering the rear cross-over GM uses on cars. Needless to say, mine had a car gasket on it. Not sure if Merc always used those gaskets, or if the orig owner of my boat was in there.

Thanks I will take it. Intake and plenum. I will pm you later to get details. Thank you.

I was going to make comments about the injectors to help out boaters what to look for. if the posters here what me to give some advice and comments -- how I see them and be able to post without me causing arguments - --- but if anyone does not want me to post I understand as well.

Really trying to be helpful no other intent about it.

These injectors themselves can hold up to the test of time and do fairly well but like anything they do and or will need to be serviced and serviced properly to maintain longevity plus be able to operate properly thru out the course. ..

Do you convert them to press in screens, I always do when I flow and service them for my customers.

Ok, will hold them for you.

Pay pal sent THANKS