Stainless marine manifolds/tails
04-15-2020, 08:18 AM
#1
Stainless marine manifolds/tails
Stainless Marine Manifolds and tails. The tails were lengthened by Eddie Young +7" inside and about 9" on the outers. Standard height risers. Not perfect but shine up nicely. The tails terminate about 4" from transom.
$1,000
$1,000
04-18-2020, 01:47 PM
#5
Registered
I’m still interested but need to do some measuring. Not sure if the risers will work with my set up without too many mods.
I have a set of manifolds with standard black risers that I had on a single engine application and am looking for a second set for a twin setup. I really just need the manifolds and was going to look for 4 matching risers.
I’ll follow up this weekend after I get my riser plan figured out
I have a set of manifolds with standard black risers that I had on a single engine application and am looking for a second set for a twin setup. I really just need the manifolds and was going to look for 4 matching risers.
I’ll follow up this weekend after I get my riser plan figured out
