33 avanti part out
 

Hull on trailer
livorsi gauges and controls
upgraded sound system
electric bolsters
trim indicators
280 tabs
offshore mounts
full hydraulic imco triangle steering
04 aluminum trailer, new wheels, tires bunks, carpet, bearings and seals.
bravo gimbals
Latham water pick ups
large fuel filters
15k
468 gen 6, HP500s roller cams, crane gold rockers , new rods and pistons. 088 heads, single plane intake, 800 Holley carbs. 6800 each 20 hours on rebuilds
bravo drives
1 DWP
1 std pick up.
20 hours on rebuilds 2300 each
stainless marine gen 2 exhaust
1800 each
https://cimg3.ibsrv.net/gimg/www.off...7b30e91d0.jpeg
https://cimg7.ibsrv.net/gimg/www.off...b6cc9ef44.jpeg
https://cimg1.ibsrv.net/gimg/www.off...bb973ff51.jpeg
https://cimg5.ibsrv.net/gimg/www.off...4a2a23332.jpeg
https://cimg8.ibsrv.net/gimg/www.off...cac84cdb4.jpeg
https://cimg1.ibsrv.net/gimg/www.off...979711b4f.jpeg
https://cimg6.ibsrv.net/gimg/www.off...9afb784f2.jpeg
https://cimg4.ibsrv.net/gimg/www.off...870b41c1e.jpeg
https://cimg5.ibsrv.net/gimg/www.off...e45bf9bec.jpeg
https://cimg6.ibsrv.net/gimg/www.off...fb42fb18b.jpeg
https://cimg7.ibsrv.net/gimg/www.off...ac3309b63.jpeg

Motors
 

Hey Mike any details on who did the rebuild on the motors, dyno info etc.

Steering wheel?

JD unlimited on the board did them
I have a similar purple wheel for 125
No dyno, orginally 454 425s with better cam and intakes

Gauges how much for all?

Throttles, trim indicators and gauges?

Keeping hull rigged for a few then I’ll part it out.

188 heads?
 

Controls
 

Mike, Price on the controls?

Keeping all parts with hull right now.

Any idea of HP on the engines?

450 / 475
boat ran 72/73

Ah okay. a little low for what we are looking for. Thanks

Need 1 or 2 and what are you looking for? I have a set of side mount whippets if wanted

Unrelated question.......whose valve covers are those,? They are exactly what I'm looking for. Back to the regularly scheduled programming.:p

Does it include hub and hardware? Could you send me or post some pics?

Thanks

I have 1 set left CD
i have hardware and I have a few hubs in a box at my garage house

bravo drive trim indicators?
 

looking for drive trim indicator hardware...saddle mounts, clamps, tubes etc for twins.

thanks!

I’ll have that on a velocity im picking up next weekend

All audio 750
trailer with hull 4000
controls 900
gauges GPS Speedo 900
seats 1300
strainers 200 / 350 pair
steerinf 2600 wheel to caps
gimbals 750 each
exhaust rings 50 a set with seals
fuel filter heads 60 each
trim pumps 175 each
280 tabs 900 with pumps
Latham water pick ups 75 each
anything else just ask

188 heads
 

Wondering if u had time to look for some 188 heads ?

justbdropped a set a mikes shop 500

188 heads
 

Can u text me to discuss,I need a set not cracked,920 716 6142

Boat is being stripped tomorrow.
anyone wants the hull speak now or forever be crushed. Hull is free. Only paying for parts on it.

Any info on the Velocity?

89/90 I think. 502 bravo boat

Looking for complete steering, how much if it isn't sold?

2600 wheel to back caps. All is there

Boat is stripped an sawzalled apart
seats sold

Engine ? Or lowers

What do you need? I have it all

Well where to start lol is the wet drive a standard bravo ? Gauges ? Gps ? And engine im getting ready to rebuild mine but if I found a deal on an engine I'd buy it

I have std bravo, XZ also.
low water and std pick up
509 502 454 509 dart motor.

looking for fat shaft ssm props got anything?

Only 1

What about the 454 engine

Have a pair of them. A d a single 509 dart block motor

Price on a single and do u have any headers

inner plate
 

Hi Mike
I am locking for a set of drive line inner plates ssm 3/4/5/ do you have them???

Best regards Ed

nothing for headers just manifold riser sets
468 is 6200
509 is 4500