IMCO SC-3 Drive
 

I have a completely rebuilt IMCO SC-3 drive. This is a 3 inch shorty drive. 1.5 ratio. The upper gears and clutch assembly are new, as well as the necessary bearing were replaced. It has upgraded Max Machine Worx caged bearings in the upper as well as their stronger tower. It also has a Max Machine Worx down shaft. The lower gears are all new and the bearing just above the top gear in the lower gearset was replaced too. New seals top to bottom and proper shiming in the upper and lower. The case is in good shape and has a 1.25 inch prop shaft. The lower has also been blueprinted and polished by Max Machine Works. Price is $12,000 My number is 810-240-2580 - Andrew
https://cimg4.ibsrv.net/gimg/www.off...965d19a024.jpg

Put that on your 20!!

Don’t worry I am. I bought two of them and then rebuilt them both. So I’m selling one and putting the other on the 20. As well as hopping up the 454 we have in there to around 675 horsepower.

What HP is this drive ratted for?

As long as you drive them nice they can handle 650 HP without much issue. I'm putting one behind 675 HP for the up coming summer.

Ttt

Ttt

Ttt

Mailbox full

Inbox has been cleared. You can also text me at 810-240-2580, Andrew.