IMCO SC-3 Drive
#1
Registered
Thread Starter
IMCO SC-3 Drive
I have a completely rebuilt IMCO SC-3 drive. This is a 3 inch shorty drive. 1.5 ratio. The upper gears and clutch assembly are new, as well as the necessary bearing were replaced. It has upgraded Max Machine Worx caged bearings in the upper as well as their stronger tower. It also has a Max Machine Worx down shaft. The lower gears are all new and the bearing just above the top gear in the lower gearset was replaced too. New seals top to bottom and proper shiming in the upper and lower. The case is in good shape and has a 1.25 inch prop shaft. The lower has also been blueprinted and polished by Max Machine Works. Price is $12,000 My number is 810-240-2580 - Andrew
Last edited by Andrew56; 12-06-2020 at 08:09 PM.
#5
Registered
Thread Starter