I have 1 complete Imco SC drive w/ -2 shorty lower, 1 1/2" spacer plate and 1:50 gears. Has less than 100 hours on it $5500.
I also have another -2 shorty lower available complete or for parts. It spins free with no noise or binding but the upper ate a set of gears so I recommend it be looked at for any metal $2350. complete.
The upper is available for parts as well let me know what you might need off of it.

All parts are plus the ride or pick up is welcomed in Philadelphia

Hi is the lower in good condition ?
Shipping to Sweden?
best regards Oskar


QUO=fireboatpilot;4776628]I have 1 complete Imco SC drive w/ -2 shorty lower, 1 1/2" spacer plate and 1:50 gears. Has less than 100 hours on it $5500.
I also have another -2 shorty lower available complete or for parts. It spins free with no noise or binding but the upper ate a set of gears so I recommend it be looked at for any metal $2350. complete.
The upper is available for parts as well let me know what you might need off of it.

All parts are plus the ride or pick up is welcomed in Philadelphia[/QUOTE]

Pm sent

Oskar, Like I said in the listing. I would recommend going thru it because the upper blew on this one. It spins free with no binding or noise but I can't be sure that there isn't metal in it. Nothing obviously broken or damaged. If I was going to use it again I would tear it down for inspection. As for shipping to Sweden I would have to check into that. Last time I shipped a pair of engines to Germany it was a nightmare. certified bug free crates etc.. Not cheap! I will look into it but will take me a few days.

2 Bill420. I got your message and will call you tomorrow.

is the -2” lower still available and is it imco?

Yes the lower is still available

Yes it's all Imco, 1 1/4 shaft, 1:50 gears. If you want it, please let me know asap. Someone wants the case only and I would rather not break it down for parts. Thanks!

UPDATE The toasted upper for parts and the lower have been sold! I STILL HAVE THE COMPLETE SC DRIVE AVAILABLE! -2 shorty, no spacers, approx. 100 hours, $5500.

Any pics of it u could send me