95 38 fountain part out
06-12-2021 | 09:25 AM
#1
Thread Starter
Brotherhood #1
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
95 38 fountain part out
95 38 fountain twin step part out.
Rigged less drive line on trailer. Full steering, bolsters, engine plates, 280 k planes, gauges, controls, full cuddy, blower engine hatches, trim pumps, indicators, harnesses , bilge pumps. Add drives and complete motors go boating
24,000
540s with mega blowers with intercoolers,make around 800 conservative numbers. Don’t have a ton of info on them. Supposed to be build with good parts. 200 hours on them. 22k pair 24 with exhaust
Gil exhaust , 1800 a set
Bravo 1s 1.5 2k each.
Boat has no drives as of right now. They broke. The set listed is a set I have in-house.
Boat is located in TX right now. Headed to MA to be parted out.
I have a set of SSM 5 drive line to make a more reliable set up.
I have a set of SSM 5 drive line set up to make a more reliable set up.
Rigged less drive line on trailer. Full steering, bolsters, engine plates, 280 k planes, gauges, controls, full cuddy, blower engine hatches, trim pumps, indicators, harnesses , bilge pumps. Add drives and complete motors go boating
24,000
540s with mega blowers with intercoolers,make around 800 conservative numbers. Don’t have a ton of info on them. Supposed to be build with good parts. 200 hours on them. 22k pair 24 with exhaust
Gil exhaust , 1800 a set
Bravo 1s 1.5 2k each.
Boat has no drives as of right now. They broke. The set listed is a set I have in-house.
Boat is located in TX right now. Headed to MA to be parted out.
I have a set of SSM 5 drive line to make a more reliable set up.
I have a set of SSM 5 drive line set up to make a more reliable set up.
