Pair of 496 short / long
11-24-2021 | 02:33 PM
#1
Thread Starter
Brotherhood #1
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
Pair of 496 short / long
I have a pair of 496 long or short blocks. Eagle rotating assemblies with SRP pistons.
Both were pulled running.
Sold the blowers off of them.
One has some bearing material in the lifer valley. Pulled the pan. 2 rods got hot. Cranks and rod caps have no finger nail lines. Feel smooth but would polish.
Had 150/200 hours in them.
Short block , crank , rods. Pistons, solid roller cams, lifters, timing covers, chains, base pans, dip sticks, oil cooler, balancer. 2800 for the metallic one. 3500 for the other. 5800 long block with all acc for bravo set up. 6500 for the good one.
No exhaust .
Both were pulled running.
Sold the blowers off of them.
One has some bearing material in the lifer valley. Pulled the pan. 2 rods got hot. Cranks and rod caps have no finger nail lines. Feel smooth but would polish.
Had 150/200 hours in them.
Short block , crank , rods. Pistons, solid roller cams, lifters, timing covers, chains, base pans, dip sticks, oil cooler, balancer. 2800 for the metallic one. 3500 for the other. 5800 long block with all acc for bravo set up. 6500 for the good one.
No exhaust .
