| shunter2005 |
01-08-2022 11:17 AM |
Check the water jacket holes in both. If they are round, the manifolds are probably older. No issue, but older. Newer ones have triangle looking holes in them. Probably not a big difference in either, but just some info to have. I was exhaust dumb early on and ordered a brand new (and expensive) set on my old 454 years ago and like snapmorgan I had to use the IMCO ps bracket to get clearance. With my 502, I had to buy the oil filter relocation kit. The last set, I bought everything piecemeal. Manifolds first and then had to search for risers. Together, I believe it was about $1400. However, I found that someone had shortened one of the risers and did a crappy job of it. Sent it back to IMCO and they made it like new again for about $150. There is always a catch with used stuff. Good luck.
|