1992 sutphen 39
 

1992 39 sutphen dominator
Factory SSM 6 boat
Had 1000s and ran 107
Been sitting a few years.
Hull and stringers are solid.
Interior / cuddy needs some love but it’s all there.
Hull rigged , gauges , controls, wiring, indicators , seats, hatch , engine plates , bilge blower, fully cuddy, , all deck hardware, beauty rings for exhaust, and dumps on transom. 8000.
Hull as described on trailer 12,000
With drives 30,000 and tabs.
Wet sump 6s stb drive I got to turn and then was smooth. But does stick when not used. Other turns fine. Included gimbals 23k
380 tabs, ends clipped. With pumps 1500
CMI sport tube tails 1500 have 2 sets (8 total)
I have a set of 1000 and 1200 , I’ll sell 1 set if wanted
Also have a dually tandem axel 1 off built Ace trailer I could put under it also for 20k, trailer only.
https://cimg3.ibsrv.net/gimg/www.off...16bfc6971.jpeg
https://cimg4.ibsrv.net/gimg/www.off...b6cf49eec.jpeg
https://cimg6.ibsrv.net/gimg/www.off...af74d0a1f.jpeg
https://cimg8.ibsrv.net/gimg/www.off...9c912a68f.jpeg
https://cimg1.ibsrv.net/gimg/www.off...6212008e0.jpeg
https://cimg3.ibsrv.net/gimg/www.off...464427925.jpeg
https://cimg4.ibsrv.net/gimg/www.off...46d038964.jpeg
https://cimg7.ibsrv.net/gimg/www.off...819b298ca.jpeg
https://cimg8.ibsrv.net/gimg/www.off...7cb7f3ce6.jpeg
https://cimg0.ibsrv.net/gimg/www.off...40c127ef9.jpeg
https://cimg2.ibsrv.net/gimg/www.off...59131a961.jpeg
https://cimg3.ibsrv.net/gimg/www.off...da696a3ed.jpeg
https://cimg4.ibsrv.net/gimg/www.off...953751c32.jpeg

I am interested in a set of tails possibly 2

Sure let me know

Trans
Gimbals
Engine plates sold
Headers als for sale. Pressure tested and repaired as needed

I was on this boat with Herb and his son few years back, this thing was a beast...

sea strainers go with the sale of the hull or sold separately?

I'm interested in the headers. Any pics or pricing?

sorry all has been parted out

Do you still have the hull for sale?

Refer to post 8!