1992 sutphen 39
04-12-2022 | 07:01 AM
#1
Thread Starter
Brotherhood #1
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
1992 sutphen 39
1992 39 sutphen dominator
Factory SSM 6 boat
Had 1000s and ran 107
Been sitting a few years.
Hull and stringers are solid.
Interior / cuddy needs some love but it’s all there.
Hull rigged , gauges , controls, wiring, indicators , seats, hatch , engine plates , bilge blower, fully cuddy, , all deck hardware, beauty rings for exhaust, and dumps on transom. 8000.
Hull as described on trailer 12,000
With drives 30,000 and tabs.
Wet sump 6s stb drive I got to turn and then was smooth. But does stick when not used. Other turns fine. Included gimbals 23k
380 tabs, ends clipped. With pumps 1500
CMI sport tube tails 1500 have 2 sets (8 total)
I have a set of 1000 and 1200 , I’ll sell 1 set if wanted
Also have a dually tandem axel 1 off built Ace trailer I could put under it also for 20k, trailer only.
Factory SSM 6 boat
Had 1000s and ran 107
Been sitting a few years.
Hull and stringers are solid.
Interior / cuddy needs some love but it’s all there.
Hull rigged , gauges , controls, wiring, indicators , seats, hatch , engine plates , bilge blower, fully cuddy, , all deck hardware, beauty rings for exhaust, and dumps on transom. 8000.
Hull as described on trailer 12,000
With drives 30,000 and tabs.
Wet sump 6s stb drive I got to turn and then was smooth. But does stick when not used. Other turns fine. Included gimbals 23k
380 tabs, ends clipped. With pumps 1500
CMI sport tube tails 1500 have 2 sets (8 total)
I have a set of 1000 and 1200 , I’ll sell 1 set if wanted
Also have a dually tandem axel 1 off built Ace trailer I could put under it also for 20k, trailer only.
