502 420 mega blower chillers Teague XR CMI
#1
502 420 mega blower chillers Teague XR CMI
Description of builds:
Started as HP500s: 7.6:1cr .030" over JE pistons,
Manley h-beam rods with arp2000 bolts, rebalanced,
arp head bolts, 525efi cams, 088 heads, crane rockers,
isky springs, billet distributors, crane cd boxes, polished
420 megablowers with superchillers 17% overdrive, 16
rib setup, new 980cfm holleys/davinci carbs this spring,
always ran Schaffer 20w50 synthetic race blend oil
changed spring and mid season, approximately 290hrs,
top ends done 50hrs ago, no blowby, no oil use, tested
120-121psi all cylinders,
brand new Hardin 100% stainless lifetime sea pumps, 12k each/ 22 pair
Teague platinum XR 1.36 unknown hours. Pulled working, should be resealed. 8k each 15 pair
CMI sport tubes, off a cat so longer pipes. 3500 each set, 7k pair
Cat engine mounts, have 2 sets 500 each pair
HP gimbals 800 each
26p bravos 750
Marine machine rams , though hulls, plates and pins. 1200
Drive shafts and carriers , 300 each
I have bravo engine bells also if needed
All parts are located in Stephenville TX, will be shipped up to me.
I can ship direct if sold before it’s ready for me.
Started as HP500s: 7.6:1cr .030" over JE pistons,
Manley h-beam rods with arp2000 bolts, rebalanced,
arp head bolts, 525efi cams, 088 heads, crane rockers,
isky springs, billet distributors, crane cd boxes, polished
420 megablowers with superchillers 17% overdrive, 16
rib setup, new 980cfm holleys/davinci carbs this spring,
always ran Schaffer 20w50 synthetic race blend oil
changed spring and mid season, approximately 290hrs,
top ends done 50hrs ago, no blowby, no oil use, tested
120-121psi all cylinders,
brand new Hardin 100% stainless lifetime sea pumps, 12k each/ 22 pair
Teague platinum XR 1.36 unknown hours. Pulled working, should be resealed. 8k each 15 pair
CMI sport tubes, off a cat so longer pipes. 3500 each set, 7k pair
Cat engine mounts, have 2 sets 500 each pair
HP gimbals 800 each
26p bravos 750
Marine machine rams , though hulls, plates and pins. 1200
Drive shafts and carriers , 300 each
I have bravo engine bells also if needed
All parts are located in Stephenville TX, will be shipped up to me.
I can ship direct if sold before it’s ready for me.