502 bad block iron rectangle heads sw florida
#1
Registered
Thread Starter
502 bad block iron rectangle heads sw florida
freeze cracked 502-461 hp engine. good rotating assy. almost no time on the engine. 502 HO dog bone roller cam. Steel crank. 7/16ths dimple rods and fordediron rectangle heads 113 cc chambers. aluminum intake similar to the L88 vette intake. GM intake. 950 Holey 4150 needs gaskets and reassembly. i am going outboard now. gonna chase redfish and snook across the flats down here. short block $400. heads $300. intake $100 holley $150. $700 for all in one swell foop. i can ship the intake and carb. heads shipping doable but pricey. block is local only. halfway between tampa and naples.
Last edited by dereknkathy; 04-02-2023 at 01:15 PM.
#3
Registered
Thread Starter
I bought the carb on a whim. Knowing I didn’t have it most likely never would have something that would need a 950 Holly in order to feed it. But it was right down the street at 200 bucks and I knew I could always resell it for the 200 bucks I paid. But the accelerator pumps are not there. Or the needle valves. So, 150.
Last edited by dereknkathy; 04-02-2023 at 01:12 PM.
The following 2 users liked this post by dereknkathy:
105Fountain (04-05-2023), SB (04-03-2023)
The following users liked this post:
105Fountain (04-06-2023)