Motors, drives, headers for sale
#1
Thread Starter
Registered
Joined: Jun 2022
Posts: 11
Likes: 2
1) 2020 Mercury Racing 1100 motor with 105 hours. Good compression and leak down. Ready to bolt in! $125k
2) 540 cubic inch Motors built by Van Dyne Racing engines with all the best parts
Bow tie blocks, H beam rods, JE pistons, Elder Brock intakes, Merlin heads, oval port, Isky cams,Holly 850 CFM carbs, Roller rockers, solid lifters. 2 available. $14,950 each
3) Teague Custom marine 468 Cubic Inch 565 HP Big block no exhaust 178 hours $13950 each
4) 2 Sets of CMI E-top Headers with through transom tails and mufflers
$6950 for 2 complete sets, 4 headers, 4 tails and 4 mufflers. Will separate and sell 1 complete set for $3500
Shipping available at buyers expense
5) Mercury Racing Dry Sump #6 Drives and Gimbals (one driveline and one close coupled) 1.49 Ratio
$59,950 for the pair
6) Set of Mercury Speedmaster #3 Drives and gimbals$15,000
7) Bravo One Drives with gimbals and steering. $10k for the pair. Will separate
Joe
253-606-2816
2) 540 cubic inch Motors built by Van Dyne Racing engines with all the best parts
Bow tie blocks, H beam rods, JE pistons, Elder Brock intakes, Merlin heads, oval port, Isky cams,Holly 850 CFM carbs, Roller rockers, solid lifters. 2 available. $14,950 each
3) Teague Custom marine 468 Cubic Inch 565 HP Big block no exhaust 178 hours $13950 each
4) 2 Sets of CMI E-top Headers with through transom tails and mufflers
$6950 for 2 complete sets, 4 headers, 4 tails and 4 mufflers. Will separate and sell 1 complete set for $3500
Shipping available at buyers expense
5) Mercury Racing Dry Sump #6 Drives and Gimbals (one driveline and one close coupled) 1.49 Ratio
$59,950 for the pair
6) Set of Mercury Speedmaster #3 Drives and gimbals$15,000
7) Bravo One Drives with gimbals and steering. $10k for the pair. Will separate
Joe
253-606-2816



