469 mag ho 2006
09-04-2023 | 09:56 AM
#1
Thread Starter
Registered
Joined: Jun 2020
Posts: 8
Likes: 2
From: Miami
469 mag ho 2006
2006 Baja Outlaw 30:
2006 MerCruiser 496 Mag HO with Bravo X Outdrives: I have 2 engines with outdrives, gimbals, steering, throttle, gauge, quite exhaust, fire suppression system, Helm minus the steering wheel and all other components needed for installation. Everything is running as it should. Engine hours are as follows 247.6 & 249.9. The port engine had a hose clamp break and melted the quite exhaust wires and the paint from the exhaust. It has since been repaired and working properly. They are still hooked up and can be started and tested. This is sold as a complete package and will not part out or separated. The shop that is going to remove the parts is charging $2,500 to remove and box them. The only reason I am removing everything is because I have decided to close the transom and install outboards. As you can see by the pictures this boat is meticulously maintained and I am in no hurry to finished it. Price is $22,500 for everything including the removal. Sorry, but I will not allow anyone to do the removal except the shop. Payment is in cash only. Price if firm, no trades. This is a complete package and a great deal.
Shipping will be around 4 pallets and around 4000 pounds. To be paid by buyer.
496 MAG HO
Port Engine:
0-749 RPM 98.5 Hours
750-1499 RPM 80.9 Hours
1500-2999 RPM 45.9 Hours
3000-3499 RPM 13.3 Hours
3500-3999 RPM 8.3 Hours
4000-4499 RPM 2.5 Hours
4500-4999 RPM 0.3 Hours
5000-5499 RPM 0.0 Hours
5500 - UP RPM 0.0 Hours
Starboard Engine:
0-746 RPM 107.5
750-1499 RPM 75.6 Hours
1500-2999 RPM 41.5 Hours
3000-3499 RPM 12.1 Hours
3500-3999 RPM 7.7 Hours
4000-4499 RPM 2.5 Hours
4500-4999 RPM 0.4 Hours
5000-5499 RPM 0.0 Hours
5500 – UP RPM 0.0 Hours
2 Bravo One X Drives with 28 Pitch Propellers
Latham Marine Steering
Swim Platform
Livorsi Gauges
2006 MerCruiser 496 Mag HO with Bravo X Outdrives: I have 2 engines with outdrives, gimbals, steering, throttle, gauge, quite exhaust, fire suppression system, Helm minus the steering wheel and all other components needed for installation. Everything is running as it should. Engine hours are as follows 247.6 & 249.9. The port engine had a hose clamp break and melted the quite exhaust wires and the paint from the exhaust. It has since been repaired and working properly. They are still hooked up and can be started and tested. This is sold as a complete package and will not part out or separated. The shop that is going to remove the parts is charging $2,500 to remove and box them. The only reason I am removing everything is because I have decided to close the transom and install outboards. As you can see by the pictures this boat is meticulously maintained and I am in no hurry to finished it. Price is $22,500 for everything including the removal. Sorry, but I will not allow anyone to do the removal except the shop. Payment is in cash only. Price if firm, no trades. This is a complete package and a great deal.
Shipping will be around 4 pallets and around 4000 pounds. To be paid by buyer.
496 MAG HO
Port Engine:
0-749 RPM 98.5 Hours
750-1499 RPM 80.9 Hours
1500-2999 RPM 45.9 Hours
3000-3499 RPM 13.3 Hours
3500-3999 RPM 8.3 Hours
4000-4499 RPM 2.5 Hours
4500-4999 RPM 0.3 Hours
5000-5499 RPM 0.0 Hours
5500 - UP RPM 0.0 Hours
Starboard Engine:
0-746 RPM 107.5
750-1499 RPM 75.6 Hours
1500-2999 RPM 41.5 Hours
3000-3499 RPM 12.1 Hours
3500-3999 RPM 7.7 Hours
4000-4499 RPM 2.5 Hours
4500-4999 RPM 0.4 Hours
5000-5499 RPM 0.0 Hours
5500 – UP RPM 0.0 Hours
2 Bravo One X Drives with 28 Pitch Propellers
Latham Marine Steering
Swim Platform
Livorsi Gauges
