Originally Posted by BY U BOY (Post 2372766)

And to make things worse my refrigerator broke this morning:mad: month old GE (Garbage Engineering)

Originally Posted by Trojan-man (Post 2372693)

Yes you can fix it that way. I have the mercruiser manual and it also says you can drill a big hole in the side of it, then thread the hole, then screw in a plug when you are done. Which part is loose, the bolt that tightens your steering tiller, or the big nut that tightens the gimbal ring that is located above the tiller?

Originally Posted by BY U BOY (Post 2372461)

The engine is easy to remove but i have no place to do it or store it
.

Originally Posted by tomtbone1993 (Post 2372853)

Good point you don't have any friends north of the Heights, who would let you use there storage.:cool-smiley-011:

Originally Posted by tomtbone1993 (Post 2372849)

can you give us a break on your problems for one day???? blah....blah....blah..

I want an Apache, no I want a Sonic, Sarah wants this....blah blah ....blah...


:evilb::evilb::evilb::evilb:

Originally Posted by BY U BOY (Post 2372858)

That is a very nice offer Mr. TBone, I shall talk to my girlfriend and try to get permission, to drive outside of the loop 610 on my time off.:

Originally Posted by BY U BOY (Post 2372860)

Im done with you go sell a car or something:drink:

Originally Posted by BY U BOY (Post 2372762)

the hole that the swivel pin goes into on the gimble is worn out i have a lot of side to side play in the drive.

Originally Posted by BY U BOY (Post 2372766)

And to make things worse my refrigerator broke this morning:mad: month old GE (Garbage Engineering)