The B.S. Thread

Reply Subscribe

Thread Tools

01-21-2008 | 05:54 PM

#16121

jeff1000man

Registered

Joined: Jun 2006

Posts: 14,914

Likes: 1

From: Lake Conroe, TX.

Quote:

Originally Posted by wstultz

negative. The only flat I have is 6"s wide and 16' feet long. We could probably cut out some three inch flat if I had a plasma.....which I don't. Some one find me a good deal on a plasma cutter.

Just use a torch.

01-21-2008 | 05:56 PM

#16122

BY U BOY

Registered

Joined: Aug 2005

Posts: 8,779

Likes: 1

From: HOUSTON ,TX

Quote:

Originally Posted by jeff1000man

Just use a torch.

I quess he has never heard of a band saw either

Last edited by BY U BOY; 01-21-2008 at 05:59 PM.

01-21-2008 | 05:58 PM

#16123

jeff1000man

Registered

Joined: Jun 2006

Posts: 14,914

Likes: 1

From: Lake Conroe, TX.

Quote:

Originally Posted by BY U BOY

I quess he has never heard of a bad saw either

"bad saw" ?

01-21-2008 | 05:59 PM

#16124

BY U BOY

Registered

Joined: Aug 2005

Posts: 8,779

Likes: 1

From: HOUSTON ,TX

http://cgi.ebay.com/DC-Inverter-Plas...QQcmdZViewItem

01-21-2008 | 06:02 PM

#16125

jeff1000man

Registered

Joined: Jun 2006

Posts: 14,914

Likes: 1

From: Lake Conroe, TX.

http://www.northerntool.com/webapp/w...6604_200336604

01-21-2008 | 06:04 PM

#16126

jeff1000man

Registered

Joined: Jun 2006

Posts: 14,914

Likes: 1

From: Lake Conroe, TX.

Quote:

Originally Posted by BY U BOY

http://cgi.ebay.com/DC-Inverter-Plas...QQcmdZViewItem

That seems like a pretty good deal.

Might need to make that a future aquisition.

01-21-2008 | 06:33 PM

#16127

tomtbone1993

Registered

Joined: Sep 2003

Posts: 15,491

Likes: 5

From: LAKE CONROE, TX

( . ) ( . )

Last edited by tomtbone1993; 01-21-2008 at 06:50 PM.

01-21-2008 | 07:05 PM

#16128

wstultz

Thread Starter

Social Distortion

Joined: Sep 2004

Posts: 5,728

Likes: 6

From: Lake Conroe,Texas

Quote:

Originally Posted by BY U BOY

I quess he has never heard of a band saw either

Yes I can use a torch or a "band" saw and make it look decent. If you want it done right you should use a plasma. Since you guys seem to have it covered.......good luck and I hope it turns out ok.

Jeff, i wouldn't buy a China special plasma cutter but that Hobart looked like a decent deal to cut up to 1/4" steel.

01-21-2008 | 08:22 PM

#16129

jeff1000man

Registered

Joined: Jun 2006

Posts: 14,914

Likes: 1

From: Lake Conroe, TX.

After a meeting of the minds and consultation with more experienced businessmen, we have declined the current location for the new shop and will be seeking a different venue.