Offshoreonly.com - The B.S. Thread

what type is the boat ?? Most of the time if the boat is purposing you have the drives to far out for the speed, when you run the boat hard the trim is set correctly for the speed.

Thats just my opinion, jeffman will correct me with eleventy explanations of the congruency of the x factor combined with the hook of the hull to determine the V factor =highest speed

depending on who set the boat up, your outdrives might need to be switched also, seen that cause a lot of turmoil at about 60 and below

bigandy

05-08-2008 07:26 AM

Quote:

Originally Posted by BoatBIATCH (Post 2551570)

depending on who set the boat up, your outdrives might need to be switched also, seen that cause a lot of turmoil at about 60 and below

i understand you are new so i will take it easy....

we dont actually give real information in this thread, we give math and equations with numbers like "eleventy" and terms like "congruency of the hook factor"

and unless i missed a meeting we dont respond to Ernie's posts, we are nice but we pretend it is not happening and just hope it ends very soon, much like the young asians that jeff pays for sex.

joew.

05-08-2008 08:25 AM

Quote:

Originally Posted by bigandy (Post 2551589)

Awesome!!! It is going to hit 90 today. Who wants to be the first to pick up golf balls this year???????? The Mainship will be leaving port this afternoon.:D

Welcome Thomas, be carefull with this site I have had four jobs since I started:evilb:

The rest of you take it in the can, and lick my hairy hacky sack:hitfan:

BoatBIATCH

05-08-2008 08:32 AM

i work for the govt... not to easy to get fired, but ill do my best

BoatBIATCH

05-08-2008 08:44 AM

explain to me what a "BIP" is?

On Time

05-08-2008 09:12 AM

Quote:

Originally Posted by BoatBIATCH (Post 2551685)

explain to me what a "BIP" is?

OK Here goes...