Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   TOPPS (https://www.offshoreonly.com/forums/topps-229/)
-   -   The B.S. Thread (https://www.offshoreonly.com/forums/topps/153269-b-s-thread.html)

joew. 07-10-2008 08:11 AM


Originally Posted by jeff1000man (Post 2618114)
I think it is about half way there.

I really hate to even start this one up, knowing what will happen to it.

Thanks for the catching on fire comment wade. :mad:

Don't forget I spent just enough time in your bilge to plant the charges for a disaster. :greenchainsaw::violent-smiley-021::blaster:

Had to stop because the paint isn't dry yet.

I am glad I will be in the mainship. Because that thing is going to be scary fast with that much power....Unless, well, we all no what unless could be:evilb:

joew. 07-10-2008 08:15 AM


Originally Posted by Trojan-man (Post 2618142)
the last email trent sent out was approx. 42 boats so far. They are going to run in 1 group, but no more than 2 or 3 wide and fastest boats leave first so they will spread out through the lake.

the card stop is going to be on the north end 1st cove before the beach or the boat ramp on the left....look for the mainship.

The raft off will be farther north before club mud in the preceding cove....again look for the mainship and a chit faced stultz :ernaehrung004::ernaehrung004::cool-smiley-027:

We are going to have a great time! No ac though:mad: I couldn't justify the extra 250.00 to get it ere in time. If I get out of the office early enough I am going to clean the boat up tonigh if anyone wants to come by.:ernaehrung004:

jeff1000man 07-10-2008 08:19 AM


Originally Posted by Trojan-man (Post 2618144)
I need to get that remote oil kit that bolts onto the back of the head also. Anyone got one laying around. I have the other kind that bolts to the manifold, but won't work for my setup

Bring your checkbook. I have some billet ones. I might have a regular one, but I am not sure.

jeff1000man 07-10-2008 08:20 AM


Originally Posted by tomtbone1993 (Post 2618130)
where can I get these for my covers?

You make them out of braided lines, Drill and tap the valve cover. Looks very clean.

joew. 07-10-2008 08:24 AM


Originally Posted by tomtbone1993 (Post 2618130)
where can I get these for my covers?

That is not where all that oil is coming from:eek::evilb::eek:

wstultz 07-10-2008 09:33 AM

Decent deal on a good hull.

http://hartford.craigslist.org/boa/747614893.html

jeff1000man 07-10-2008 09:45 AM


Originally Posted by wstultz (Post 2618458)

That costs more than your whole boat. Quit posting this junk and show us a good deal forr once. :eek::grinser010::evilb:

wstultz 07-10-2008 09:55 AM


Originally Posted by jeff1000man (Post 2618473)
That costs more than your whole boat. Quit posting this junk and show us a good deal forr once. :eek::grinser010::evilb:

Sorry Jeff but there are no boats out there for free. That boat would run in the high 90's with some of your junk in it.

BY U BOY 07-10-2008 09:58 AM


Originally Posted by Trojan-man (Post 2618118)
Holy Chit !!! That thing is taller than Buy U Boy on his tippy toes :eek::evilb:

I'd rather be short than bald:evilb::evilb:

jeff1000man 07-10-2008 10:01 AM


Originally Posted by wstultz (Post 2618497)
Sorry Jeff but there are no boats out there for free. That boat would run in the high 90's with some of your junk in it.

Yeah, but it would take 40K in rigging to finish it.


All times are GMT -5. The time now is 11:43 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.