The B.S. Thread
03-04-2009 | 02:07 PM
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
That stuff is expensive chit.
Here is that pump. I get some discount, but still hurts.
http://www.keitheickert.com/detail.aspx?ID=7889
03-04-2009 | 03:03 PM
Registered
Joined: Sep 2003
Posts: 15,491
Likes: 7
From: LAKE CONROE, TX
Looks like a bunch of nice stuff for the Magnum.....
On a side note, my center engine had a 5/16 nut on top of the #5 piston. No other damage....It appears it was the jam nut for the flame arrestor... have a new piston on the way
On a side note, my center engine had a 5/16 nut on top of the #5 piston. No other damage....It appears it was the jam nut for the flame arrestor... have a new piston on the way
03-04-2009 | 06:02 PM
Registered
Joined: Mar 2005
Posts: 3,927
Likes: 2
From: Montgomery, Texas
03-04-2009 | 07:40 PM
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
Good to know that is all that it was. I guess the valves made it out OK?
At least it was a cheap fix.
03-05-2009 | 12:34 AM
Registered
Joined: Sep 2003
Posts: 15,491
Likes: 7
From: LAKE CONROE, TX
do any of you have a extra bravo gimble plate in good condition?
like this one
http://www.offshoreonly.com/classifi...-o6859-en.html
like this one
http://www.offshoreonly.com/classifi...-o6859-en.html
Last edited by tomtbone1993; 03-05-2009 at 12:43 AM.
03-05-2009 | 12:46 AM
Registered
Joined: Sep 2003
Posts: 15,491
Likes: 7
From: LAKE CONROE, TX
03-05-2009 | 08:14 AM
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
