Offshoreonly.com - The B.S. Thread

If it was WeeMan...that is just wrong on so many levels....

its one thing to photoshop a picture or have some fun w/ painters tape.....but to tatoo a guy's car who helps you work on your rig and gives you a place to sleep...is just wrong:rolleyes:

but then again, it is just easier to remove the 8 bolts from the manifold than the two bolts from the pump:rolleyes:

Wasn't me. And that PS pump is a biatch to remove with the line still attached.If the exhaust is still on.

tomtbone1993

04-22-2009 03:44 PM

Quote:

Originally Posted by Rcolter (Post 2850329)

ok

Tom also research Taco Rub Rail???. THey have the inserts but just have to figure out what size railings are on the boats.

here are the part numbers for the rub rail, if it is like mine

http://www.offshoreonly.com/forums/f...where-buy.html

Rcolter

04-22-2009 03:48 PM

I just need the little cover piece in the back? I will have to measure my rail to find out which one works

jeff1000man

04-22-2009 04:00 PM

The list

http://www.atf.gov/wanted/index.htm

Trojan-man

04-22-2009 08:32 PM

Quote:

Originally Posted by wstultz (Post 2850218)

I believe Weeman did retaliate in a big way. CaptainCock himself called me today blaming me for a large cock drawn on the back of the BMW that he had apparently been driving around with all day. Nice job.:D:juco::D

:evilb::evilb::evilb: hes been driving around with that for about 3 days now :cool:

Trojan-man

04-22-2009 08:42 PM

nevermind...apparently I didn't read in far enough. I did mine with a finger in the glistening dew....there was no mud or dirt application. oh and I wish I would have done it, bc tbone has one comin to him :evilb:

Trojan-man

04-22-2009 08:50 PM

Quote:

Originally Posted by wstultz (Post 2850023)

I would tell the factory to lick my nut sack since they can't seem to take 30 minutes out of their life to run a boat 10 miles and make your stuff. Instead they make you drive your $hit 1600 miles. Charlie and Co just went down a few pegs in my book.

There was more to in than that. I talked with charly jr at the miami show and he told me Acrylico told him they didn't want to make my stuff and ship it because they didn't want to have to deal with adjustments if it didn't fit. Now that the boat is there, that problem will be eliminated. The fault lies with the lexan company and not the banana guys, they have done everything they told me they were going to do thus far.

Spk1 and Rob needed a truck to get back to miami so it all just worked itself out naturally. Now I can book a 1 way ticket, sip some bushwhackers for a few days on the beach and have a nice 1 way joy ride home :ernaehrung004: oh and thank you spk1, I owe you a brewsky

jeff1000man

04-22-2009 09:05 PM

Quote:

Originally Posted by Trojan-man (Post 2850556)

For some reason, spk1 left out that part of the story, or did he?

Is that the drink you guys were talking about the other night that ya'll had at the turtle?

I need the recipe. :ernaehrung004:

Trojan-man

04-22-2009 09:12 PM

Quote:

Originally Posted by jeff1000man (Post 2850568)

For some reason, spk1 left out that part of the story, or did he?

Is that the drink you guys were talking about the other night that ya'll had at the turtle?

I need the recipe. :ernaehrung004:

well whatever the story you heard, spk1 he helped me out bigtime.

yes that is the drink from the turtle.

recipe = 1 bucket of ice, and everything else on the shelf at the bar = many panty droppers lol :drink::drink: