Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   TOPPS (https://www.offshoreonly.com/forums/topps-229/)
-   -   The B.S. Thread (https://www.offshoreonly.com/forums/topps/153269-b-s-thread.html)

wstultz 05-07-2009 02:38 PM


Originally Posted by tomtbone1993 (Post 2861098)
My brother n law is looking at this boat and wants my input....any of you monkeys know anything about this bucket?

http://houston.craigslist.org/boa/1159165770.html

Nope, beside the old 40's with the small windsheilds were the only sporty looking resin bucket that Formula ever made. I dig the pimp a$$ cabin interior.:cool:

Rcolter 05-07-2009 02:39 PM

Looks good to me. Even looks to have the signature pink and teal that is required to be cool.

jeff1000man 05-07-2009 03:23 PM


Originally Posted by wstultz (Post 2861081)
Like my trailer. I guess I'll just use on/off.

On and off might do the same thing. better check it on a spot before you hose it down

All that stuff has a little diluted acid in it.

jeff1000man 05-07-2009 03:24 PM


Originally Posted by tomtbone1993 (Post 2861098)
My brother n law is looking at this boat and wants my input....any of you monkeys know anything about this bucket?

http://houston.craigslist.org/boa/1159165770.html

I emailed the guy a while back when the price was higher, but I don't rememebr what he told me.

Looks like a pretty good project.

BY U BOY 05-07-2009 04:45 PM


Originally Posted by wstultz (Post 2860919)
Dude, you can only blame yourself for having Squatter touch your boat.:grinser010:

On a similar note. What works best to take of the Tickfaw nasty hull stain?

Magic eraser:evilb:

Seriously though,Hit it with a 50/50 mix of water an muratc acid with a brush. You will have to wax it after though.

BY U BOY 05-07-2009 04:47 PM


Originally Posted by wstultz (Post 2861013)
What is Purple Clean and where do I buy it?

That stuff I let you use on your shop floor. It worked on most of the spots on my boat after the run but still have a little left I an going to hit wit MA.

wstultz 05-07-2009 05:19 PM


Originally Posted by BY U BOY (Post 2861180)
Magic eraser:evilb:

Seriously though,Hit it with a 50/50 mix of water an muratc acid with a brush. You will have to wax it after though.

Di(k:evilb:
Isn't on/off basically a diluted Muratic acid? I have some on/off in the chemical cabinet, I'll just use what I got.

tomtbone1993 05-07-2009 05:20 PM


Originally Posted by jeff1000man (Post 2861136)
I emailed the guy a while back when the price was higher, but I don't rememebr what he told me.

Looks like a pretty good project.

it looks like a hell of a project that I don't want anything to do with....:grinser010:

jeff1000man 05-07-2009 05:48 PM


Originally Posted by tomtbone1993 (Post 2861210)
it looks like a hell of a project that I don't want anything to do with....:grinser010:

My thoughts exactly.

Now that you have Smooth dialed in, you never want another I am sure.

tomtbone1993 05-07-2009 07:19 PM


Originally Posted by jeff1000man (Post 2861230)
My thoughts exactly.

Now that you have Smooth dialed in, you never want another I am sure.

nope i don't.....it is also nice having TMR around who does not mind working on our boats, and goes above and beyond my expedations:cool::ernaehrung004:


All times are GMT -5. The time now is 05:28 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.