Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   TOPPS (https://www.offshoreonly.com/forums/topps-229/)
-   -   The B.S. Thread (https://www.offshoreonly.com/forums/topps/153269-b-s-thread.html)

tomtbone1993 07-18-2007 10:28 AM


Originally Posted by Trojan-man (Post 2201673)
wstultz doesn't have the nuts for this......

http://www.offshoreonly.com/classifi...ct=3238&cat=24

Spick1 put down a deposit for Smooth Operator.....after Saturday he fell in love with her......he is ready to step way.....up:):)

tomtbone1993 07-18-2007 10:31 AM


Originally Posted by Beak42 (Post 2202323)
Hey Tom not to change the subject or anything but how did your Mike Hood props run? What pitch are they and which direction are you turning them? Were you happy with his work?

They will need to go back, the RPM's are all over the place.

Port 5800

Center 4800

Starbord 5400

They should all be around 5200

I am going to swap the center and the port and see what happens before I take them back.

On Time 07-18-2007 11:32 AM


Originally Posted by tomtbone1993 (Post 2202331)
They will need to go back, the RPM's are all over the place.

Port 5800

Center 4800

Starbord 5400

They should all be around 5200

I am going to swap the center and the port and see what happens before I take them back.


At boat shows etc. I have begun to notice triple setups with the center engine running a lower pitch prop because of being lower in the water and less ventilated. Most of the time Bravo 1's run partially surfacing acc. to Merc Racing. You might call them for some tips.

spk1 07-18-2007 02:04 PM


Originally Posted by Trojan-man (Post 2201962)
here ya go spk1......best deal you will find, pull the trigger

http://www.offshoreonlyclassifieds.c...o17450-en.html

You bastard guy,,
Im using every bit of control to wait untill our company deal is done before I splurge,, and you go and show me this :eek: .
What do you guys think about alpha drives? availibility replacement parts etc?

wstultz 07-18-2007 03:22 PM


Originally Posted by spk1 (Post 2202649)
You bastard guy,,
Im using every bit of control to wait untill our company deal is done before I splurge,, and you go and show me this :eek: .
What do you guys think about alpha drives? availibility replacement parts etc?

Go for it you punk. Alphas will be fine as long as you don't go supercharging those biatches or upping the HP any.

bigandy 07-18-2007 05:23 PM


Originally Posted by spk1 (Post 2202649)
You bastard guy,,
Im using every bit of control to wait untill our company deal is done before I splurge,, and you go and show me this :eek: .
What do you guys think about alpha drives? availibility replacement parts etc?

If you have to sell your family business before you can buy a $26k boat maybe you should look at diffferent sports, perhaps:

www.conroekayakclub.com
www.waldenwomenscanoeclub.com
www.diamondheadbiggayscarabandsailboatclub.com
or better yet a club you know some of the memebers in
www.meandmydadscruisersofconroe.com
http://www.boughtmyboatonEBAYandputi...only3years.com

jeff1000man 07-18-2007 07:05 PM


Originally Posted by bigandy (Post 2202914)
If you have to sell your family business before you can buy a $26k boat maybe you should look at diffferent sports, perhaps:

www.conroekayakclub.com
www.waldenwomenscanoeclub.com
www.diamondheadbiggayscarabandsailboatclub.com
or better yet a club you know some of the memebers in
www.meandmydadscruisersofconroe.com
http://www.boughtmyboatonEBAYandputi...only3years.com

Or maybe if you are to cheap or scared to finish the project that you have you should stay off the powerboat forum and go to.

www.oldfatguyswholiveonpontoonboats.com

How long has it been now? 2 years.?

jeff1000man 07-18-2007 07:38 PM

Might be time to join the cruiser club.

http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us

bigandy 07-18-2007 08:10 PM


Originally Posted by jeff1000man (Post 2203079)
Might be time to join the cruiser club.

http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us

hell ya buy it and then join

www.fatguyswithwoodenboatsandmullets.com

jeff1000man 07-18-2007 08:15 PM


Originally Posted by bigandy (Post 2203109)
hell ya buy it and then join

www.fatguyswithwoodenboatsandmullets.com

Or I can joint

www.fatguyswhosleepatbeerjoints.com

:evilb:


All times are GMT -5. The time now is 07:14 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.