The B.S. Thread
#9351
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
#9352
#9354
#9355
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
Still can't run it over 3500rpm's
I am putting more GOO on the oil leak this afternoon, But now I have a problem with it cutting out around 3900-4200. I am going to check the filter and rebuid the card, but it acts like I have a lobe flattened on the cam.
Runs like a workhorse at 35-3600 and below.
If I can't get it fixed before Sunday, I am going to put those big Azz cruiser props on it so I don't have to turn any rpm's
I am putting more GOO on the oil leak this afternoon, But now I have a problem with it cutting out around 3900-4200. I am going to check the filter and rebuid the card, but it acts like I have a lobe flattened on the cam.
Runs like a workhorse at 35-3600 and below.
If I can't get it fixed before Sunday, I am going to put those big Azz cruiser props on it so I don't have to turn any rpm's
#9356
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
#9359
Still can't run it over 3500rpm's
I am putting more GOO on the oil leak this afternoon, But now I have a problem with it cutting out around 3900-4200. I am going to check the filter and rebuid the card, but it acts like I have a lobe flattened on the cam.
Runs like a workhorse at 35-3600 and below.
If I can't get it fixed before Sunday, I am going to put those big Azz cruiser props on it so I don't have to turn any rpm's
I am putting more GOO on the oil leak this afternoon, But now I have a problem with it cutting out around 3900-4200. I am going to check the filter and rebuid the card, but it acts like I have a lobe flattened on the cam.
Runs like a workhorse at 35-3600 and below.
If I can't get it fixed before Sunday, I am going to put those big Azz cruiser props on it so I don't have to turn any rpm's



