Pintle Hitch
04-23-2006, 03:50 PM
#61
Registered
Re: Pintle Hitch
Originally Posted by Prater
OK, I now have the XDR on but what is everyone doing for their plug? I use my factory plug on different trailers and there is no where to attach it to the XDR.
04-23-2006, 04:20 PM
#62
Registered
Thread Starter
Re: Pintle Hitch
The pintle is made by Wallace Forge.
I ordered the XDR online. it cost just under $200 shiopped to Oklahoma. It was from etrailerpart.com
I ordered the XDR online. it cost just under $200 shiopped to Oklahoma. It was from etrailerpart.com
Last edited by Prater; 04-23-2006 at 04:23 PM.
04-23-2006, 04:52 PM
#63
Registered
Join Date: May 2005
Location: Scottsdale
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pintle Hitch
Originally Posted by Prater
OK, I now have the XDR on but what is everyone doing for their plug? I use my factory plug on different trailers and there is no where to attach it to the XDR.
04-24-2006, 06:05 AM
#64
Registered
Re: Pintle Hitch
Originally Posted by Prater
The pintle is made by Wallace Forge.
I ordered the XDR online. it cost just under $200 shiopped to Oklahoma. It was from etrailerpart.com
I ordered the XDR online. it cost just under $200 shiopped to Oklahoma. It was from etrailerpart.com
05-15-2006, 10:24 PM
#66
Registered
Platinum Member
Re: Pintle Hitch
Here is the typical junk that peeps tow with that has to be re done heavy duty...this was on the back of this toter home we are going to take racing with the boys! 
05-15-2006, 10:29 PM
#67
Registered
Platinum Member
Re: Pintle Hitch
I can not believe people were using this reciever ....going to do a pintle with heavy reciever and air breaks...pintle to be 15 or 20 ton..all tied in to frame and also bolted..through frame rails.
....the start of the side drop plate to frame rail....bolted and some weld to frame......
