Electric over Hydraullic Conversion
#1
Platinum Member
Platinum Member
Thread Starter
Join Date: Nov 2002
Location: LONG ISLAND/LAKE MURRAY
Posts: 2,399
Likes: 0
Received 1 Like
on
1 Post
Electric over Hydraullic Conversion
Just finished that over the weekend. This is the CATS AZZ! Much better than getting your 1st microwave. Don't know what I've done without it for all these years.
#3
Platinum Member
Platinum Member
Thread Starter
Join Date: Nov 2002
Location: LONG ISLAND/LAKE MURRAY
Posts: 2,399
Likes: 0
Received 1 Like
on
1 Post
Alum tri-axle. I'm really not sure on how much it would cost because I had the cab controller and did a trade of services for the electric actuator. All I really purchased was the break away and 7 pole pigtail. wire, etc. It is well worth it. Just messing around in my driveway I was playing with the sensitivity controll and locked the brakes on the gravel. Very well worth the stopping power.
#7
Registered
Join Date: Jul 2005
Location: Tulsa, OK
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
Too bad there's no flip-off icon!!! If it weren't for your man with 18ft arms coming out of nowhere to block our 3 pointer, it could have all been different! Oh well, coulda-woulda-shoulda! We'll get there again in the next 2 years.
#8
The BAD Guy
Platinum Member
I would say the main benefit is the trailer will actually stop instead of push you around. If you are getting a new trailer get it with the elec over hyd and you will be very glad you did
#10
Platinum Member
Platinum Member
Thread Starter
Join Date: Nov 2002
Location: LONG ISLAND/LAKE MURRAY
Posts: 2,399
Likes: 0
Received 1 Like
on
1 Post
You definetly need to consider this option. What trl manufacturer are you going with ?