Mexican might do a better job than the other

napa sells the 3M one, walmart, pep boys, auto zone...when you get it cut it into blocks with a piece of wire and flatten it out, use real slippery soap/water solution, and have at it. think of it as playdoh that helps you, the flatter you make it the more it will last. most of all if the clay sticks while you are rubbing onthe hood, you need more soap/lube..slipery is good and dont press real hard, let the clay do the work...it's the equivelant of about a 4000 grit sand paper. call me if you have any issues.

Can we talk about those issues:rolleyes::drink::drink:

playdoh

I talked to mark about your issues yesterday :D...

My ocd or me maiking to much power for my hull bottom:p:D

lol, both, that and the 3 am text messages... :D

I dont stay up that late:rolleyes::ernaehrung004:

Had a white '00 250 that had rail dust that showed up a few months after bought. Covered under warrenty. Rust spots showed up again later and dealer couldn't cover under warranty as they said it was a new dusting condition. Clay bar is the bomb.