Shipping Axles
01-13-2008, 12:28 PM
#3
VIP Member
I had two shipped several years ago to me. They came in the back of a truck sliding around on the floor. I can't remember the shipper, but I can't recommend them either.
Not sure how much is on the ends of your axles, but mine were complete with hubs, bearing buddies, studs and lug nuts. You might consider taking two pieces of 2x8 (2 feet long) and drilling out lug holes and center holes, and actually bolting both axles together with the boards like "wheels". This would make them one solid unit, and would protect the hubs and studs. Mine came missing some of the bearing caps/buddies, and some of the lug nuts were missing too. Protect the ends well.
Not sure how much is on the ends of your axles, but mine were complete with hubs, bearing buddies, studs and lug nuts. You might consider taking two pieces of 2x8 (2 feet long) and drilling out lug holes and center holes, and actually bolting both axles together with the boards like "wheels". This would make them one solid unit, and would protect the hubs and studs. Mine came missing some of the bearing caps/buddies, and some of the lug nuts were missing too. Protect the ends well.
01-13-2008, 05:19 PM
#6
SeaRay Sundancer
Gold Member
Join Date: Nov 2005
Location: SW Missouri
Posts: 2,914
Likes: 0
Received 0 Likes
on
0 Posts
01-15-2008, 11:26 PM
#7
Registered
Join Date: Jul 2005
Location: marion,iowa
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
