Offshoreonly.com - Where should I seperate trans from transfer case?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Trucks, Trailers and Transportation (https://www.offshoreonly.com/forums/trucks-trailers-transportation-159/)

- - Where should I seperate trans from transfer case? (https://www.offshoreonly.com/forums/trucks-trailers-transportation/181913-where-should-i-seperate-trans-transfer-case.html)

handfulz28

03-11-2008 03:56 PM

Where should I seperate trans from transfer case?

1 Attachment(s)

I'm selling the trans to one person and transfer case to another. I know the bellhousing/main trans body, then there's a section which looks like it has the rear mount. Then the main transfer case section, followed by the tailhousing.

Is the transfer case going to be easy to seperate from the section with the trans mount? Am I in for any nasty surprises when it comes to getting these pieces apart? FWIW, it's a 4L65E/AWD setup from an '04 Silverado SS.

Neverfastenuf

03-11-2008 04:34 PM

No surprises. Just seperate the transfer case from the extension housing (mount).

Sam

spazboz

03-11-2008 04:39 PM

If there is an OSS in the intermediate housing, be sure not to damage it. Other than that, not too bad to do.

BTW-OSS=Output Speed Sensor

All times are GMT -5. The time now is 06:24 PM.