30 1/4" hub section circumference

whadawe divide that by pi to get diameter?

been awhile...:p

Trailer project
 

SWEET =- Got any old tires I could use 6 - 16.5

Thanks

pi x D= cir

D=ci/pi

D=9.633 (9 5/8) :)

nice work!

the radiation physics bumped most of the machinist know-how out of my head.
I'm noticing a definite loss of storage as I get older :p

lines.

trailerpartsdepot. three 24"s and three 72" male 3/16" male IF swivel ends.

best part- $75 for all six! GREAT PRICE.

those flares are "fussy" took me an hour to get rid of all the leaks tightening (overtightening it seemed) a little at a time.

got all the leaks cured...
I took the original drop lines off and cleaned them up. Getting the steel lines to not leak at the "T"s when I put these back together was a biotch.

was about to go get 2 new 36" hard lines to replace them as the problem is the radius of the aproach, thay are just bent a little to tight to go to the bottom of the T that getting the flare to seat was a PITA

get that all straight and I find I have a leaky caliper!!!

piston o-ring or bad surface I imagine. About to get on the phone.

moving on to LED's

UPDATE:

put a call into Robert at southwestwheel. "Manuacturer defect, call them, but if they give you some long process I'll get a caliper out to you today and deal with them, they are right down the road..."

Talked to Kevin @ Kodiak, caliper going out to me today no questions asked. Return shipping on them.

his biggest problem is wanting to know who's sleeping at the test bench!

Good service.

my P3 came today as well

hopr the damm thing works good in this combo

I noticed/remembered today it was 119.95
the direct plug-in harness was 10.69

pplmotorhomes

good site/great prices

I don't have tires, but I have (6)aluminum 16.5 8-lug rims available.