Kodiak Brake Swap
#1
Registered
Thread Starter
Join Date: Jan 2006
Location: Phoenix, AZ
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
Kodiak Brake Swap
I'm switching over to Kodiak 1 piece hub/rotors from brand X rotor over hub. My dilemma is that my tires are now 5/8" inboard from what they were originally. This leaves me with 2 7/8" wheel travel between the sidewall and the top lip (inner) of the fender. I have torsion axles (3) and I don't know if 2 7/8" is enough wheel travel. Any thoughts/experiences?
#3
Registered
Thread Starter
Join Date: Jan 2006
Location: Phoenix, AZ
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
I'll have to go outside and measure, but off the top of my head I'd say 3 7/8" original clearance. I'm going to torque things down and roll over my curbing to check clearance today. As for the 1/2" spacers, if I go that route I'd probably have to press new lugs into the hub.