Adjustable ball mount
#2
Registered
Join Date: Aug 2008
Location: bristol,Ct
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
all the ones I have seen only go up to 10K. I was looking for a 6" drop or adjustable rated for 15K and had to get a 6" drop only. I do have a nice adjustable billet hitch but its only 10k.
#3
Registered
Join Date: Nov 2009
Location: Miller Place,NY
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
In order to get 15,000# you need a class 5 hitch which has a 2&1/2" opening instead of the standard 2". I have a weight distribution insert which has a series of holes for different height adjustments. If you need one I can gladly get it for you
#4
Registered
Thread Starter
Join Date: Sep 2006
Location: Richmond - Ophelia, Va
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
Would really like a quick (pin) adjustable one. Have several trailers I tow and all are slightly different heights. May end up with the bolt together and a sleeve for the lighter trailers.
#7
This would be my only suggestion Lin:
http://www.etrailer.com/dept-pg-Acce...on_Shanks.aspx
You would have to buy a WD plate to attach to the shank as well, and they bolt together, not pins. However, you do have adjustment.
Poke around the rest of that sight. They have a lot of stuff including a 3" drawbar for a 3" hitch which I have never heard of until now.
http://www.etrailer.com/dept-pg-Acce...on_Shanks.aspx
You would have to buy a WD plate to attach to the shank as well, and they bolt together, not pins. However, you do have adjustment.
Poke around the rest of that sight. They have a lot of stuff including a 3" drawbar for a 3" hitch which I have never heard of until now.
#10
Registered