|
Nice!
That's a hell of a price too. |
Originally Posted by ziemer
(Post 3863242)
Nice!
That's a hell of a price too. |
Originally Posted by ICDEDPPL
(Post 3863142)
No brake lines, Electric. Grand Sports Center was great and let me borrow their boat jacks:
http://33outlaw.zenfolio.com/img/s4/...03615196-4.jpg She don`t quite fit thou : :lolhit: http://33outlaw.zenfolio.com/img/s4/...03614750-4.jpg Wish I had a nice big pole barn like Mike Tcat but ....I don`t :cartman: so I red neck it up http://33outlaw.zenfolio.com/img/s8/...01350020-4.jpg BTW, anyone local to Chicagoland area looking for paint, sandblast etc.. the guy I found did a great job at a great price. To sandblast, prime and paint was under $1000. He also ran new wires, cut and fit the diamond plate and built the drive guard . All that around $1800. Can`t beat that, I had another quote for just paint at $5K :eek: http://www.manta.com/c/mx2c6h8/renew...efinishing-llc Located in Addison |
1 Attachment(s)
Iccedppl- Great job. Did you use pressure treated wood on the bunks? I just replaced my bunks and used pressure treated wood and carpet w/glue and staples on the bottom.
Wannabe |
Looks sharp. I have bought SS center caps on eBay the last few times.
|
Good looking trailer rehab!
Did you cover the LED strips with anything or do they just adhere? Any close up daylight pics? |
1 Attachment(s)
Damn I did this myself and it cost me over $50,000.00 just to sandblast and paint. Industrial sandblast equipment, 185 CFM compressor, sand and new booth for paint, the paint cost me more than $2,000.
|
Originally Posted by ICDEDPPL
(Post 3863201)
Thanx Joe! Its nice to have it done.. trying to work on two projects.. boat and trailer at the same time was burning me out.
I`m also looking for these center caps I had on the Baja.. don`t seem to be able to find them anywhere.. ?? http://33outlaw.zenfolio.com/img/s1/...27274624-4.jpg Steve The trailer looks great by the way! |
[QUOTE=brian41;3863399]Damn I did this myself and it cost me over $50,000.00 just to sandblast and paint. Industrial sandblast equipment, 185 CFM compressor, sand and new booth for paint, the paint cost me more than $2,000.[/QUOTE
Yikes. Sounds like you need to call Icdedppl's guy |
Looks real nice
|
| All times are GMT -5. The time now is 09:33 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.