Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Trucks, Trailers and Transportation (https://www.offshoreonly.com/forums/trucks-trailers-transportation-159/)
-   -   LS project (https://www.offshoreonly.com/forums/trucks-trailers-transportation/376050-ls-project.html)

F-2 Speedy 08-09-2023 09:42 AM

Thanks,
https://cimg9.ibsrv.net/gimg/www.off...cc2abeba1e.jpg
https://cimg1.ibsrv.net/gimg/www.off...d9fb8dec9d.jpg
integrating the three wiring harnesses was a bit of a challenge

F-2 Speedy 08-09-2023 11:35 AM

https://cimg6.ibsrv.net/gimg/www.off...788b6ff4e9.jpg

F-2 Speedy 08-19-2023 04:32 PM

Cold air intake done, trans shift linkage sorted, rear diff full and friction modifier added, if things go right gonna fire it tomorrow.....:ernaehrung004:


https://cimg2.ibsrv.net/gimg/www.off...4848bd4cbd.jpg
https://cimg3.ibsrv.net/gimg/www.off...98cd59d5b6.jpg

OldSchool 08-22-2023 06:14 AM

Outstanding!!!!

F-2 Speedy 11-08-2023 03:06 PM

Having all kinds of issues with the air ride system, so I took a break took a burn in the 67


https://cimg5.ibsrv.net/gimg/www.off...40d4252194.jpg

Powerquest230 11-18-2023 04:06 PM

Truck is looking awesome!


https://cimg7.ibsrv.net/gimg/www.off...585d34587d.jpg
What kind of issues with the air ride and also which controller are you using? My frustrations with Fi-tech fuel injection has me ready for the LS swap and then getting pre-set ride height upon startup and maintaining that ride is my next biggest challenge.


Powerquest230 11-18-2023 04:17 PM

For the LS Swap guys, Is there anything on an LS swap that was an unexpected pain in the a$$? Currently frustrated as heck with aftermarket FI on a SBC/ turbo 400 setup that I wanted to upgrade to 4spd automatic. At this point instead of replacing the FItech and converting to a 4L60 I’m thinking it’s time to swap all for an LS package. Fuel system, computer, etc will need attention are there any other surprises?

F-2 Speedy 11-18-2023 04:20 PM

The system I got with the truck is Air Maxx with the EVALVE ? controller, the issue is keeping it aired up been chasing pipe fitting leaks, Im about to chuck this chit out the window and go coil over. I pulled all those pressure sensors off the top of the valve body and plugged them trying to eliminate things that can leak.


https://cimg4.ibsrv.net/gimg/www.off...5d1f21e390.jpg
https://cimg5.ibsrv.net/gimg/www.off...e0832f8117.jpg



Powerquest230 11-18-2023 05:29 PM

I am neither a fan nor hater of the air ride systems and since I am not concerned about how low can ya go, have been thinking about going back to spring suspension. I am ready for being able to drive or let it rip anytime and anywhere. The waiting 5 minutes for compressors etc before the first drive of the month is pretty silly. 😆

compedgemarine 11-18-2023 05:41 PM

I hate air ride as the systems you can buy are no where near what the factory setups are like. the compressors tend to be loud and after about a year they wear out and take twice as long to air up. plus I hate the way they handle. coilovers are a much better way and far more tunable unless you are one of the guys that just has to show up at the car show and lay the frame on the ground (I am not one of those). as for the LS get one from 2006 truck or 2005 car or earlier as they dont have the DOD, etc to deal with. if you get a fly by wire make sure to get the TAC and gas pedal as there are different ones based on the harness and ECM with the engine. as for fuel I put a pump in the tank and use a corvette filter that has the regulator built in and mounted it in the back so the return hose is only about 20" long.


All times are GMT -5. The time now is 06:20 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.