![]() |
Are you guys getting quoted pricing at the time of order? For 2023 Ford suspended all fleet incentives as well as retail incentives.
|
Originally Posted by TylerBurich
(Post 4851827)
Are you guys getting quoted pricing at the time of order? For 2023 Ford suspended all fleet incentives as well as retail incentives.
This is Canadian Dollars so its roughly $40,000. USD..LOL I will get A-plan on the new one which is around 13k or better off of List. Plus ive been offered 112k on my 22. |
Dealer said they guarantee I would pay no more than MSRP. They wouldn't honor the X plan pricing however, but I hear that's only $700 off for '23.
|
I ordered a Lariat on Nov. 10th. I went with the 7.3 and a 430 gear. I was going to do the diesel but with the cost of fuel and shortages predicted, I went gas. The cost difference saved me about 9500.00 which is the cost of the new Whipple set up for the F250 and 7.3. I already talked to them and will go that route. 700 hp and around 750 lbs of torque not quite the power of the diesel but less expense.
I have pulled my Cafe with a 6.2 and 373 gear and didn’t have any big issues, 750 lbs of torque and the 430 should pull with no problem. I also ordered mine not able to apply my X plan. They did say that by the time it is in that I should be able to use it. |
Originally Posted by 1Zoom
(Post 4851988)
I ordered a Lariat on Nov. 10th. I went with the 7.3 and a 430 gear. I was going to do the diesel but with the cost of fuel and shortages predicted, I went gas. The cost difference saved me about 9500.00 which is the cost of the new Whipple set up for the F250 and 7.3. I already talked to them and will go that route. 700 hp and around 750 lbs of torque not quite the power of the diesel but less expense.
I have pulled my Cafe with a 6.2 and 373 gear and didn’t have any big issues, 750 lbs of torque and the 430 should pull with no problem. I also ordered mine not able to apply my X plan. They did say that by the time it is in that I should be able to use it. I seen the whipple kits and thought the same thing after warranty runs out. |
FYI guys I know we don't have our new trucks yet but I couldn't pass up this deal. Weld wheels is blowing out certain models on their company website. I got a set of 22x10s for $490 delivered. They have some 20s for a little less. That's like buy one get 3 free. Limited styles and sizes but there are some left that fit the super duty 8x170 bolt pattern.
|
Our 2 fleet trucks are scheduled for late January 23' build
|
Originally Posted by 87MirageIntruder
(Post 4852082)
FYI guys I know we don't have our new trucks yet but I couldn't pass up this deal. Weld wheels is blowing out certain models on their company website. I got a set of 22x10s for $490 delivered. They have some 20s for a little less. That's like buy one get 3 free. Limited styles and sizes but there are some left that fit the super duty 8x170 bolt pattern.
|
There’s a couple in the rotary forged section. But I didn’t like any of them enough even for $100 a wheel.
|
Originally Posted by Unlimited jd
(Post 4852146)
There’s a couple in the rotary forged section. But I didn’t like any of them enough even for $100 a wheel.
|
| All times are GMT -5. The time now is 02:35 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.