2023 Super Duty
#12
Registered

Joined: Apr 2007
Posts: 595
Likes: 103
From: Ontario

This is Canadian Dollars so its roughly $40,000. USD..LOL I will get A-plan on the new one which is around 13k or better off of List. Plus ive been offered 112k on my 22.
#14
Registered

Joined: Jun 2011
Posts: 462
Likes: 372
From: Palos, Illinois
I ordered a Lariat on Nov. 10th. I went with the 7.3 and a 430 gear. I was going to do the diesel but with the cost of fuel and shortages predicted, I went gas. The cost difference saved me about 9500.00 which is the cost of the new Whipple set up for the F250 and 7.3. I already talked to them and will go that route. 700 hp and around 750 lbs of torque not quite the power of the diesel but less expense.
I have pulled my Cafe with a 6.2 and 373 gear and didn’t have any big issues, 750 lbs of torque and the 430 should pull with no problem.
I also ordered mine not able to apply my X plan. They did say that by the time it is in that I should be able to use it.
I have pulled my Cafe with a 6.2 and 373 gear and didn’t have any big issues, 750 lbs of torque and the 430 should pull with no problem.
I also ordered mine not able to apply my X plan. They did say that by the time it is in that I should be able to use it.
#15
Registered

Joined: Jun 2007
Posts: 7,311
Likes: 1,817
From: Merritt Island, FL
I ordered a Lariat on Nov. 10th. I went with the 7.3 and a 430 gear. I was going to do the diesel but with the cost of fuel and shortages predicted, I went gas. The cost difference saved me about 9500.00 which is the cost of the new Whipple set up for the F250 and 7.3. I already talked to them and will go that route. 700 hp and around 750 lbs of torque not quite the power of the diesel but less expense.
I have pulled my Cafe with a 6.2 and 373 gear and didn’t have any big issues, 750 lbs of torque and the 430 should pull with no problem.
I also ordered mine not able to apply my X plan. They did say that by the time it is in that I should be able to use it.
I have pulled my Cafe with a 6.2 and 373 gear and didn’t have any big issues, 750 lbs of torque and the 430 should pull with no problem.
I also ordered mine not able to apply my X plan. They did say that by the time it is in that I should be able to use it.
I seen the whipple kits and thought the same thing after warranty runs out.
#16
Registered

Joined: Dec 2016
Posts: 583
Likes: 363
From: Portland OR
FYI guys I know we don't have our new trucks yet but I couldn't pass up this deal. Weld wheels is blowing out certain models on their company website. I got a set of 22x10s for $490 delivered. They have some 20s for a little less. That's like buy one get 3 free. Limited styles and sizes but there are some left that fit the super duty 8x170 bolt pattern.
#18
Registered

Joined: Mar 2006
Posts: 247
Likes: 24
From: Grand Rapids, MI
FYI guys I know we don't have our new trucks yet but I couldn't pass up this deal. Weld wheels is blowing out certain models on their company website. I got a set of 22x10s for $490 delivered. They have some 20s for a little less. That's like buy one get 3 free. Limited styles and sizes but there are some left that fit the super duty 8x170 bolt pattern.
#20
Registered

Joined: Jun 2007
Posts: 7,311
Likes: 1,817
From: Merritt Island, FL


