Thanks for the input... Got the new truck
#31
GLH...Take a look at this system if you're looking for a headrest set up. I've installed ALL of them. You name it, I've done it. These are hands down the best bang for the buck on the market right now. We installed four of these just this week. Installation is SOOOO much easier than the other brands it's not even funny. Connect three wires and your done. Hot, ground, and switch...party over.
Player is built into the screen so there is no need to mount and wire a player. The two screens just plug into each other. Has a wireless FM modulator to play through you radio. Comes with two wireless headphones.
Trust me on this one.
http://www.audiovox.com/webapp/wcs/s...3904&langId=-1
Buck
Player is built into the screen so there is no need to mount and wire a player. The two screens just plug into each other. Has a wireless FM modulator to play through you radio. Comes with two wireless headphones.
Trust me on this one.
http://www.audiovox.com/webapp/wcs/s...3904&langId=-1
Buck
#33
Originally Posted by GLH
Buck whats your number.
I can't PM you for some reason.
The link doesn't work now
I can't PM you for some reason.
The link doesn't work now
I'm at home right now. Cell 479-427-0111
Shop # is 479-524-0111. I will be taking off thru Wednesday for Spring Break. If you need some help before then give me a call on the cell.
Peace,
Buck
#38
Nice truck GL....
Yeah, those stock tires are trash... I could only bear to drive on them for 5,000 miles before switching..
I went up two sizes to 285s, but I think 265s would have been a better choice.
Before spending the $$ on those 19.5 blingers..... drive your truck, then drive a like truck with the big wheels...
Just get some nice Alcoas and put 265/75 16s on there. You'll have a much better pulling truck.
And while we're talking about spending money..
I just bought a Diablo Predator programmer and AFE intake for my truck. I still need to do the exhaust, but I reprogrammed for 60hp and holy schiz man... look out.
I wish I had those stock tires on there so I wouldn't feel bad about lighting them up!
You're best off with the Juice, like what Bill is talking about, if you pull alot... but it's more money....
You'll have to get the exhaust and air intake for sure...
Yeah, those stock tires are trash... I could only bear to drive on them for 5,000 miles before switching..
I went up two sizes to 285s, but I think 265s would have been a better choice.
Before spending the $$ on those 19.5 blingers..... drive your truck, then drive a like truck with the big wheels...
Just get some nice Alcoas and put 265/75 16s on there. You'll have a much better pulling truck.
And while we're talking about spending money..
I just bought a Diablo Predator programmer and AFE intake for my truck. I still need to do the exhaust, but I reprogrammed for 60hp and holy schiz man... look out.
I wish I had those stock tires on there so I wouldn't feel bad about lighting them up!
You're best off with the Juice, like what Bill is talking about, if you pull alot... but it's more money....
You'll have to get the exhaust and air intake for sure...
__________________
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
#39
Here's the installed intake. It took about 1/2 hour to pull out the stock stuff and bolt this in. Overall fit is about 90%
This is the Stage 2 kit, with the intake pipe. Stage one is just the airbox/filter.
the filter is a K&N copy. I guess K&N's patent ran out....
This is the Stage 2 kit, with the intake pipe. Stage one is just the airbox/filter.
the filter is a K&N copy. I guess K&N's patent ran out....
__________________
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
#40
Registered

Joined: Sep 2003
Posts: 1,632
Likes: 13
From: Argyle, TX
GLH Also on the 19.5 the ones picture were a 10 lug adapter style where as brents are a direct bolt on. Hub and lug centric, as offshore stated when you get ready give either he or I call. As for the extrao mods to like an intake afe stage 2 kit or a mac kit are good, exhaust I just did a 5" with an aero turbine muffler and 8" tip. Programmers are all over the place edge, diablo, van aken, tts extreme. Depends on what you want to run.



