| Bad Ass Industrial |
07-17-2007 04:26 PM |
32' coming soon
It's official. We decided to hold off on tooling the 27 FC and go straight to tooling a 32. We are going full throttle on this project in order to have one in time for the LA show 2008. This will be a true tunnel, 10' beam, 32' length, full single canopy, full inner liner boat.
http://www.hotboat.com/image_center/..._Shadow_FC.jpg
"32 will be the full length. Running surface just over 30. We are now doing a lot of one off custom tooling. So anything is possible for finished styling. We do offer front and back cap, as well as full cap. Yes, it is being designed to accept 6 drives.
Lay up will depend on what the customer wants. We can do a standard wet lay, vaccum bag, pre preg epoxy, or resin infusion. We have done aout five times as many resin infused boats as any West coast custom builder has done, so we're pretty good at it.
The full canopy will be a lot like the one going on our 26 Steatlh.
We will have a poker run edition available. Most people are showing interest in having the driver/throttle man configuration with the buckets together and throttles in the middle.
Most will be set up as a "fast" cat style, but we will build whatever the customer wants. So some mid cabin seats. porta potti, bed, set up will be offered too.
It will be able to run in the ocean.
http://www.hotboat.com/image_center/...2_bottom_4.jpg |
