Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Velocity (https://www.offshoreonly.com/forums/velocity-40/)
-   -   Velocity VR1 Sets F-1 Record...Again! (https://www.offshoreonly.com/forums/velocity/109983-velocity-vr1-sets-f-1-record-again.html)

tiufb 08-23-2005 07:52 PM

Re: Velocity VR1 Sets F-1 Record...Again!
 
Any results on the CMIs yet? I know several people who are waiting to hear how they work.

CAVelocity 08-24-2005 06:23 AM

Re: Velocity VR1 Sets F-1 Record...Again!
 
He said that there is a nationwide backorder.... no big surprise. I will post more when he gets them.

Oh Deere 08-26-2005 07:11 PM

Re: Velocity VR1 Sets F-1 Record...Again!
 
OK Boys...Was able to get a few runs in this evening. Picked up a good 4 mph so far in dead calm. Ran with my labbed 28 pitch Bravo 1 and bounced off 5150 a few times. Will be running a labbed 30 Bravo 1 tomorrow, but it may be a bit much. With some prop work, i think I can eeek 5-6 mph. Mid range to high end was the best. If you run without mufflers, it will be LOUD.

tiufb 08-29-2005 04:22 PM

Re: Velocity VR1 Sets F-1 Record...Again!
 
That's pretty impressive for just an exhaust change, keep us posted.

PIT BULL 10-29-2009 08:36 PM

I know,old thread,anybody have one of the massaged hydro props around for my VR1???

RAPTOR1 11-04-2009 08:35 PM


Originally Posted by PIT BULL (Post 2982176)
I know,old thread,anybody have one of the massaged hydro props around for my VR1???

I've got a 26 and a 27 QIV that have been worked over. The 26 went 91 on gps @ 5700 on my old 26/280 and the 27 is one of the race props from my 390. You're welcome to try them.

PIT BULL 11-04-2009 08:47 PM

Are you looking to sell them?What power was in your 280?I am in the process of having a 30 done at Halls. I think it might be a little too much wheel though.

RAPTOR1 11-05-2009 07:33 PM

Yes they are for sale, the 26 has a small crack in one of the blades that i've been told can be fixed but the blades are extremely thin. As for the power in my 280 it was a 502 MPI bored .030 w/ a lot of goodies , never dyno'd but my top end went up 600 rpm with the original 26 QIV. Jeff at hydromotive said I added at least 200 hp to gain that much so it was at least a solid 600. The 27's were on my 390 when I bought it and all I can say is that they are top end only, they weren't very good all around performance but one may work well on a single engine app. I'm switching to bigger propshafts this winter so I wont be using them .

PIT BULL 11-05-2009 07:55 PM

91 with a 26@5700 in a 26??? You must of had 700-800 hp.
The Vr1 with a 525 has an 86+ mph kilo record with a 29 pitch. I have a big shaft so they wont fit.

RAPTOR1 11-06-2009 09:02 PM

i was just offering some props for you to try or buy. Why are you questioning the performance of my previous boat. My 26 went 78.6 on GPS in factory trim in 1996 when some of you couldn't spell GPS. If you need verification on her performance after the modifications there are a lot of guys on the Chesapeake w/ Velocities who can back me up and one in Sanford Florida, Initials S.S.


All times are GMT -5. The time now is 12:39 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.