Offshoreonly.com - Bought engines today VV

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Velocity (https://www.offshoreonly.com/forums/velocity-40/)

- - Bought engines today VV (https://www.offshoreonly.com/forums/velocity/185529-bought-engines-today-vv.html)

Quote:

Originally Posted by Velocity Vector (Post 2618030)

If you see anything I missed please speak up.

1- Large box Depends. :eek:

I know what you mean about planning. Its all the little things you take for granted like head gaskets. My build has been stalled almost two weeks due to non stock on Felpro steel shimmed head gaskets that I need for my blower engines. My interior guy still hasn't finished my back seat. I am glad I kept the Formula untill the Velocity is done.

WOW!... :eek: Thats a serious parts list!! can't wait to find out how she's gonna run

Quote:

Originally Posted by Velocity Vector (Post 2618030)

:food-smiley-007:All my parts are in, IMCO extension boxes arrived today, looked like UPS rolled them all the way from Califorina. I had to send them out to get blasted and powder coated.

If you see anything I missed please speak up.
First post on this thread was 04-28-2008 thru 7-9-08. 72 days so far, shipping/rebuilding engines/gathering parts. It takes a lot more planning and time than I realized. Thanks guys!

Updated Parts/cost List:
2 - Mercury Supercat race engines $29,000.00
2 - Weldon 1000 HP Fuel pumps $1,400.00
2 – Regulators w/ by-pass Areomotive $500.00
2 - Oil coolers & brackets $500.00
2 - Keith E. Oil pre-lubers $1,400.00
2 - Hardin Marine water separators $440.00
2 - MSD Marine distributors $780.00
2 - MSD high vibration coils $100.00
2 - MDS coil brackets $10.00
2 - MSD sets rpm chips $132.00
2 - MSD insulated plug wires $200.00
2 - Stellings headers $13,000.00
2 - Stellings tailpipes $3,000.00
2 - Air activated switchable mufflers $2,400.00

2 - Mercury XR race drives W/ 1" shorties $13,000.00
2 - 15.25 X 34P Mercury Marine props $1,500.00
2 - IMCO 12" Extension boxes $8,000.00
1 - IMCO Tie bars Lower $379.00
2 - IMCO HD Gimbal rings & helmets $2,700.00
2 - K-Plane 380 plates $1,800.00
2 - K-plane pumps $500.00
2 - Trim pumps $500.00
4 - Billet 42oz. reserve fluid reservoirs $800.00
2 - Rule 2000 bilge pump $310.00
2 - Dual billet trim reservoirs for pumps Dana Marine $900.00
3 - Billet battery boxes Dana Marine $400.00

1 - Piratecom 5 person intercom system W/extreme headsets $2000.00
1 - VHF Radio $585.00
1 - VHF Remote microphone $160.00
1 - VHF antenna $100.00
1 - Ratchet mount $25.00
1 - VHF radio flush mount $25.00
1 - Go Pro video camera $170.00

$86,716.00
Tax: $7,370.00
Shipping: $3150.00

Total: $97,236.00
- Parts sold: $14,000.00
Parts = $83,236.00:food-smiley-007:
1- Large box Depends. N/C furnished by RaggedEdge:ernaehrung004:

:eek::eek:: DAYUM,and I thought I was bad.

Holy SSSSS!!!

I'll tell you if that was my list it would have to include:

1 - Divorce Attorney
2 - Half of everything I own.

OH.....How much is Dberry charging you to put the puzzle together?

Hope that didn't salt the wound

I let the girl that trims toenails at the dock see a pictire of your boat. She thinks your hot and wants to swap spit. I gave her your # cause your boat is gonna be faster than mine. What are friends for? Here is her picture, be gentle with her she packs a gun(357) and gets what she wants, good luck, your good buddy, Andy...

Quote:

Originally Posted by Andy (Post 2619323)

You are a friend aren't you,:ernaehrung004: By the time that list of parts gets in the boat it probably won't even float much less beat your's. I might have to get a center trim tab to even get'er on plane. I'll trade you these three gals for your toe nail clipper.

Quote:

Originally Posted by 007joe (Post 2632651)

any updates vec?

Just called, nothing yet, they have 5 parks and wildlife airboats getting new props put on to go south to Dolly huricane "top priority". I did buy a SS bimini with side curtains one of those camper looking tops. Came off a 38 fountain should make a nice add-on, looks like it may be fall before the boat gets done at this rate. I may need it.:drink:

Hey Velocity Vector,

What happend to the tractor headers? Do you still have them? Might need a set.

Thats a big list of nice parts there man!!!

Thanks
Mange