|
Originally Posted by DKerns
(Post 2699157)
Excess, once I get my boat dialed in, I will have to get someone to take a pic of the 41 from my boat at 90+mph to show it up on the pad!!!:ernaehrung004::drink:
|
Originally Posted by Velocity Vector
(Post 2699297)
I'll bring my 400MM zoom lens so I can see you way back there. :party-smiley-004::food-smiley-007:
Maybe once you get some seat time in that beast!:evilb: |
Originally Posted by DKerns
(Post 2699299)
Maybe once you get some seat time in that beast!:evilb:
|
Originally Posted by Velocity Vector
(Post 2698862)
30-32' = 15 1/4"
26' = 15" 22' = 12" x 14' give or take a little! Starts flattening out just as the V comes down under the boat. It is perfectly flat a couple of feet after that. |
Originally Posted by EXCESS ENERGY
(Post 2699148)
Sorry BILL, the pad on 41' is 18.5" wide and goes approx. 13' turns into a V to the front. The 41' does get up on the PAD like the 22',26',30' and 39'. Curts single 32' gets up and stays on the pad easily. I"d like to see his boat with 900-1000 hp. It would brake a lot of hearts. BOB.
|
Originally Posted by Velocity Vector
(Post 2699302)
YEEEE! your going with me.:eek:
:eek: :eek: :traurig001: Me You Texomapowerboater (respectively) |
Originally Posted by DKerns
(Post 2699308)
:eek: :eek:
:traurig001: Me You Texomapowerboater (respectively) |
LOL:drink:
|
Originally Posted by Velocity Vector
(Post 2699305)
Hi Bob, how is my boat going to react to what I am doing to it? Any clues
|
Originally Posted by EXCESS ENERGY
(Post 2700177)
Vector, you never know until you try the combination. I think you are going to have your hands full,but you never know. Over 10 years ago STEVE STEPP talked me out of building a 32' #5s and blown 600 in motors. [QUOTE STEVE} build a 41' then you can use all the power you will ever want to put in it, and run safely. BOB
|
Heeee!, "Rock & Roll BABY" Maybe I can get Steve Step to take that 41' mold and block off the front and add that back 10' to mine.
|
Originally Posted by Velocity Vector
(Post 2700645)
Heeee!, "Rock & Roll BABY" Maybe I can get Steve Step to take that 41' mold and block off the front and add that back 10' to mine.
When that time comes, just find a nice 39 with stock power and swap everything from boat to boat and send the 32 down the road! |
Originally Posted by Velocity Vector
(Post 2693068)
You sounded like my neighbor lady when you said that.:evilb:
|
Originally Posted by Vicious22
(Post 2701076)
V, that's funny...made me laugh out loud.
|
| All times are GMT -5. The time now is 01:02 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.