|
Originally Posted by Velocity Vector
(Post 2692938)
D, don't want to get two personal but could you show us your pad too?
|
??? what the hell, why would you make a pad the same size on a 40 footer and a 32 footer
|
Same mold.
|
To cut costs on a new mold probably. What was the width and length within 1/4 in?
|
It has been a while, but I remember it being about 18 inches wide.
|
So VV's pad is 18", is that righ VV?
|
Andy,
It has been a while the 40 had a noticeably wider pad than the 30. I thought the 30 was about 12. I must be mistaken. If the 30 is 18 than the 40 must have been about 24. The Old 32 is completely different then the 320. |
Originally Posted by Velocity Vector
(Post 2692938)
D, don't want to get two personal but could you show us your pad too?
I will see what I can do...... I believe it is aound 12 inches, just don't hold me to that! |
Originally Posted by Andy
(Post 2692583)
My pad width is 15 1/4 wide X approx 4' long. .
|
The pad on my 26'/280 runs basically the whole length; 18-20ft x 15" or so wide...
|
| All times are GMT -5. The time now is 04:57 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.