Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Velocity (https://www.offshoreonly.com/forums/velocity-40/)
-   -   Prop Selection (https://www.offshoreonly.com/forums/velocity/202719-prop-selection.html)

qaberdeen 05-25-2009 09:23 AM

not sure,

it's the MSD 6M-2Lmarine box..with the rev limiter built in..i don't think it had the timing control box

007joe 05-25-2009 10:40 AM

Haven't looked at this thread in a while..... Looks great! :drink:

Velocity Vector 05-25-2009 12:48 PM

First make sure the small white wire from the MSD Box is not touching a ground also check voltage at the small and large red wires from the MSD. The Mag Pickup in the distributor may be going bad, it happens.

007joe 05-25-2009 01:43 PM

also,you Probably already checked, but I've had problems with grounds in many cars with msd ignitions.....Make sure it and the engine are properly grounded....

qaberdeen 05-25-2009 04:42 PM

3 Attachment(s)
here's some updated pics..

I going to check the groud again,

thanks again

Velocity Vector 05-25-2009 05:08 PM

Looks great, you did a very good job, Check the ground if that is OK then check to see if the wiggling pin hasn't fallen out of the wobbling hole.

DareDevil 05-25-2009 05:14 PM


Originally Posted by Velocity Vector (Post 2872611)
wiggling pin ..... wobbling hole.



HAHAHAHA:grinser010:

qaberdeen 05-25-2009 05:29 PM

thanks fellas,

Hopefully i can have this sorted soon,

q

qaberdeen 05-25-2009 07:11 PM

I just checked some of the wires, it looks like the mechanic had it grounded to the battery, but he did do the checklist a couple of times that is in the manual, but still was no spark..

Velocity Vector 05-25-2009 07:24 PM

Might give MSD a call they have good tech support


All times are GMT -5. The time now is 11:02 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.