2003 26 Velocity For Sale
#53
Registered
Joined: Dec 2009
Posts: 2,480
Likes: 2
From: Wyandotte, MI
It was pretty simple and quick. As with anything else it's all in the prep work. I cleaned all surfaces with simple green to remove all the normal soil. Then cleaned again with a wax and grease remover (have to be careful because it is a bit harsh on the vinyl). Then tape off the areas that don't need the dye. Then spray it on. I used about 3 coats. Since it is a dye and not paint, it is absorbed by the vinyl so dry time is about 10 minutes between coats. Within about 1-2 bours it is ready to be handeled. Since it is sprayed on I would suggest removing the item to be dyed from the boat so you don't get overspay all over the boat.
As far as durability, I don't know..... This is the first time I have tried to dye vinyl on a boat. So I will keep you guys up to date as time goes on. As far as I am concerened if it lasts just one season that would be great. I just don't have the $$ to deal with having the seats and sunpad recovered right now.
Next project is a custom amp rack in the cabin. I will post pics once it is done (should be mid-week).
#56
Registered
Joined: May 2009
Posts: 50
Likes: 0
From: deerfield beach. fl
What was the brand of vinyll dye you used? the stuff i saw at the auto parts store looked like a paint, it was called duplicolor i think. and it looked way to white
Last edited by SAMDAHL76; 05-03-2010 at 10:47 PM.
#59
Registered
Joined: Dec 2009
Posts: 2,480
Likes: 2
From: Wyandotte, MI
So far so good. But I am in Michigan and the boating season hasn't really begun... I have had it out about 9 times so far. The seats have gotten a little dirty, but have cleaned easily with simple green. I won't really know until we get into the heat of summer.





