Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Velocity (https://www.offshoreonly.com/forums/velocity-40/)
-   -   Time to Plane in a 260 (https://www.offshoreonly.com/forums/velocity/232031-time-plane-260-a.html)

low_psi 06-05-2010 07:12 PM

Time to Plane in a 260
 
I have an 03 260 with a 496 mag and no trim tabs. With similar equipment how long should it take to get up on plane? I have 2 additional group 31 batteries (70 lbs each) which I am certain are slowing me down a bit. But I feel my boat is still taking way too long. Adding tabs would certainly help, but I think I still have some engine gremlins...........What do you guys with the 260 and even the 280 see in time to plane?

qaberdeen 06-05-2010 08:26 PM

Lowpsi
Without Tabs it definatly takes time to plane especially with a load, but i considering adding tabs just for that purpose..

Hope that helps

low_psi 06-05-2010 09:08 PM

I am looking into tabs, but unsure as to size needed... I don't want to spend a ton of $$...

qaberdeen 06-05-2010 10:36 PM

I was thinking about going with the eddie marine's, but i was in Fl d other day, and went by the factory, and Steve Stepp said that he's tried all of them, but he always ends up going back to the Kplanes..

007joe 06-06-2010 08:19 AM

My 260 (24') was slow to plane until i added the tabs, I used the large eddie marine tabs and haven't had a problem, going into my third season with them. It gets right up on plane now

low_psi 06-06-2010 09:02 AM

I think I am going to try out the Lenco 18x14 race tabs. I like the idea of the electric actuator. Ease of install, and no hydraulic pumps to deal with. I have read good things about them.


All times are GMT -5. The time now is 03:29 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.