VR1 Hemi
#3
Thread Starter
Banned
Joined: Feb 2005
Posts: 9,373
Likes: 1
From: Arlington Tx
Eric Colby wrote the article. He said 50-80 was 8.9sec and 60-80 was 8.7. No time to plane but I would guess 4-4.5sec. Top speed was 100.2. 572/700 Hemi built by Ray Barton Engines in Pennsylvania. XR1 w/2" shortie on a 12" Stellings box. 15 1/2x31" P-5 Hydromotive prop.
Last edited by Catmando; 04-11-2011 at 12:23 AM.
#6
Eric Colby wrote the article. He said 50-80 was 8.9sec and 60-80 was 8.7. No time to plane but I would guess 4-4.5sec. Top speed was 100.2. 572/700 Hemi built by Ray Barton Engines in Pennsylvania. XR1 w/2" shortie on a 12" Stellings box. 15 1/2x31" P-5 Hydromotive prop.
#7
Registered
Joined: Apr 2003
Posts: 1,838
Likes: 0
From: Punta Gorda
Steve drove it at the lake O shoot out and it ran in the 90s.
I seem to remeber I ran it on the lake at 92 while we where building my stagerd boat and the oil cooler kept leeking. and I thought it had a its on the back.
I seem to remeber I ran it on the lake at 92 while we where building my stagerd boat and the oil cooler kept leeking. and I thought it had a its on the back.
#8
Thread Starter
Banned
Joined: Feb 2005
Posts: 9,373
Likes: 1
From: Arlington Tx


