New to me!
#61
Thread Starter
Registered User
Joined: Apr 2011
Posts: 47
Likes: 0
From: Hensley, Ar.
#63
Registered
Joined: Feb 2005
Posts: 217
Likes: 2
From: FL
On my 290. I switched from a labbed Bravo 1 (with pointy tips) to a Hydro P5X--more of a full-cupped tip, bow-lifting prop. (It also added a fifth blade.) Made a world of difference in stability and performance. It cut the chine walking tendency in half. I think most Velocitiys like to ride with the nose up, so the pressure center is pushed onto the back of the pad. Not sure if this applies to the 32 design though...
#67
Registered
Joined: Jun 2007
Posts: 709
Likes: 0
From: iowa
i mounted a 14" flat screen on the wall between the cockpit, and cabin. had to move the switches, but no big deal.
I have a cheap DVD player, and run everything off an invertor plugged into the cig lighter. Works great, and keeps my son entertained.
I have a cheap DVD player, and run everything off an invertor plugged into the cig lighter. Works great, and keeps my son entertained.
#69
Thread Starter
Registered User
Joined: Apr 2011
Posts: 47
Likes: 0
From: Hensley, Ar.
I found a plug in 13.5 inch with a dvd built in to it. I don't think I am going to drill holes in my wall. So the plan is to set it on the counter when in use and rap it up in towels during the day.
I did buy a inverter for the blender and phone chargers. Now I got to find a good place to run 4 long wires from the batterys to the cabin. Anybody know a secret???
I did buy a inverter for the blender and phone chargers. Now I got to find a good place to run 4 long wires from the batterys to the cabin. Anybody know a secret???


