Just got word back from Brad Wilson at Great Oak. He's got 15 rooms blocked off for us. If we need more I can add, but we'll need to know quick. 007Joe, if you were able to post up a FB event feel free to post up the link...If not, I can post one on the Velocity Group.

Not sure how they are blocked... Either my name (Jeff Ziemer), Velocity, or just ask for Brad! ;)

Thanks!

Special thanks for all yours and Joe's efforts in putting this together . There is a ramp they might let people use , if you work it out ahead of time . :party-smiley-020:

I was setting up the Facebook event today, but wanted to get permission from Velocity first, so waiting for a response on that. If it's cool to use their name and page, I'll get it done now...

Here's a link to the Facebook event!
https://www.facebook.com/events/7207...an_user_joined

Oh, And I guess it's close enough to official, but I should be picking up Tripps 30' Velocity in about 2 weeks!
:party-smiley-048:

Congrats!!!

I sent a message to Kenny the other day, and added he and Steve to the invite list. I'm sure they'll let us know if it's a problem. doh! :evilb: :evilb:

I've been meaning to get by there to see the new factory, just haven't had a chance...it's not as convenient to my office as the old Sanford location. ;)

It looks like I will not be able to make it. I'm very disappointed!

Thanks for all your hard work setting this up.

Just made my reservation at mears, probably going to head to northeast Friday than shoot down (by water hopefully) to mears Saturday morning!

Joe,

I expect to lauch at the Nauti Goose/Anchor Marina Saturday morning and then go to Mears as well.

Rick

Cool, As it's gets closer I'll get you my info!

Talked to Don aka Rump "Shaker" , he hopes to have his boat ready in time to be there . Don has been in touch with Joel , and will also try and bring him along for the get together . Don had some 509's built that are now ready , they are up at Tony's getting rigged and installed . I spoke with Rusty about coming down from NY , have to wait and see on that .